• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. E

    42" Vyper Bype

    If Steve is willing to help you by getting one lazer cut I would be happy and go with that. That is what I call service and trust me when I say this. Most hobbyshops would tell you that there is nothing the can do for you. Good luck with your hunt.
  2. E

    42" Vyper Bype

    Good point. Call castle and they told me the Lvc might be set too high. gonna wait for the castle link to arrive and then look at data before adjusting anything. Now this makes me wonder about my slick 51. running the same hacker motor with the hacker 70 amp speed control using a 4 cell 2200 mah...
  3. E

    42" Vyper Bype

    Thanks for the info. I researched the info last night and found lots of info. I was going to change the lvc. Also thought of swapping out this esc with the quantum 65. Esc I have in my 3dhs 58 edge. I run two 3c in the edge. Do you think the 75 ice would be better in the edge with motofly??
  4. E

    42" Vyper Bype

    Thanks for the help. Do not have a watt meter to test. I resoldered the connector and it was ok. What is the lvc. Never had an issue with an esc. Like this and I do have other cc esc. I tested a couple different lips and I had one that ran perfect at full throttle. Tried another 4c 2200 mah 30c...
  5. E

    42" Vyper Bype

    i went with the rec. set up from 3dhs using hacker motor and cc 75 lite esc. prop is 14x7. I am using 4c 2650 30c lipos and the esc is cutting off when I hit full throttle. no bad connections and lipos are good. do I need to switch the programming on the esc.???? Thanks, Eric
  6. E

    3DHS New Products and General Plane Info/Help for Fanatics

    The last three builds (300 shp,58 edge and now my vyper bype) I have had one side of the elevator higher than the other. The stab is straight,covering good,no warps,and both sides in the joiner are set all the way in. I have about 1/4 difference on each end. Someone told me its not that big of a...
  7. E

    42" Vyper Bype

    Now I am in between the bype and the 48 super vyper. I have the edge 41,edge 58,42 slick,51slick, 47shp. I wanted something a little different. I do own the ultimate amr bipe.I fly fast and slow. Mostly 3d. Any suggestions??? if I go with the super vypervcan I run hs85mg all the way around. I...
  8. E

    42" Vyper Bype

    thanks, Eric
  9. E

    42" Vyper Bype

    I am ordering this , would you guys say the best motor is the a-30-12x. I usualy go with the rec. Set up. Thanks, eric
  10. E

    3D Hobby Shop 47" Extra 300shp

    Finished my shp build and got a chance to see how she does last sunday. This plane will harrier all day. I love the slow flight but was wondering what this bird would be like with a little more power. I am using the rec. Set up omega 103 with a thunderbird 54 amp esc. and xoar 13x6.5 prop.I am...
  11. E

    3D Hobby Shop 47" Extra 300shp

    That was my next step. Thanks
  12. E

    3D Hobby Shop 47" Extra 300shp

    I went with omega 103 . Almost done with the build but seems that my xoar 13x6.5 will not work with the 40mm extreme flight spinner. What kind of spinner are you guys using with wooden props????
  13. E

    3DHobbyShop 51" AJ Slick

    Don't you hate when that happens!!!!!!!!! it's like getting in a big dent in your car and not even having the keys iin the ignition. LOL
  14. E

    3DHobbyShop 51" AJ Slick

    We all have to start somewhere. From the looks of it you guys took off running!!!!!
  15. E

    3DHobbyShop 51" AJ Slick

    Thanks, I can wait , just thought it was a pretty common size. great work on this site.I am glad to see this forum as active as it is. Other place is like a ghost town lately. Lol.
  16. E

    3DHobbyShop 51" AJ Slick

    3dhs is out of the landing gear for the slick 51. Anyone know of any aftermarket gear that will work. looked at espirit but not sure how good they are. Thanks,Eric
  17. E

    3DHS 58" Edge 540

    Nice graphics. I went with some b and e graphics also.
  18. E

    New Here? Introduce yourself!

    Mike, great looking site!!!!!!! I will pass the word as a 3d forum is long overdue!!!!!! Great job Thanks, eric
Top