dskuro95
100cc
If you wanna see what my mancave looks like a little bit here it is:
http://www.youtube.com/watch?v=8597lyFiojY
The van is what I bring the planes in because there is so much room. I ran 8 or 6 gauge wire to the back for my hitec x4. Had to use that to maintain volts.
http://www.youtube.com/watch?v=8597lyFiojY
The van is what I bring the planes in because there is so much room. I ran 8 or 6 gauge wire to the back for my hitec x4. Had to use that to maintain volts.
Anthony7820
70cc twin V2
I sort of wanted to keep this low key, but it turns out I have to make this announcement. I have decided to resign from team 3drcf, due to the fact that I want to broaden my articles and posts to other forum sites as well, and also I would like to open my position on the team to someone else who is interested in being involved and helping others, on team 3drcf. Thanks everyone for the support and the time involved to put me on the team.
Anthony Donzella
Anthony Donzella
gyro
GSN Contributor
While we never restricted your posting of articles and posts on other sites, we accept your resgination without prejudice.
Good luck Anthony, we appreciate having the chance to work with you.
Please note that your position isn't "open" for people to apply however, as the team is invitation only.
See ya around!
Last edited by a moderator:
Murocflyer
70cc twin V2
I just wanted to stop and say THANKS for all the great support 3DRC forum members have shown for the Model Aviation Mentors project. I have gotten tons of volunteers for this effort from the people here and it is greatly appreciated.
For those that do not know what I am talking about, or to volunteer their services, have a look here: http://www.3drcforums.com/showthrea...odel-Aviation-Mentor-Help-Others-In-Our-Sport!
Frank
For those that do not know what I am talking about, or to volunteer their services, have a look here: http://www.3drcforums.com/showthrea...odel-Aviation-Mentor-Help-Others-In-Our-Sport!
Frank
Lonelasso
70cc twin V2
*uPdate*
Here's my post on RCG GuerriLLa thread (I didn't wanna re-type it over again ! :veryshocked
WeLL, how long have I been complaining about my right thumb ??opcorn: Y'all remember.....the 'how far can you bend yours' routine ?
MaTTer of fact, I asked Bonedoc for his opinion @ his going away gathering.
And, he said the joint felt 'crunchy' After he 'manipulated' iT, iT hurt for almost 2 wEEks !
So, today, I saw my hand surgeon for a followup on the left hand surgery and I asked about doing xrays (which have never been done !) and he said...sure, lets go. Turns out, he has a clinic right there on his floor !
The xray revealed.....I do indEEd have basal joint arthritis ! And, iT's slightly dislocated !!
No worries he says......we'll fix it when I have the next surgery !!
I've placed rectangles (pictured below) over the affected joints. There's supposed to be space (cartilage fills the space) between the bones.
I wiLL advise !opcorn::thumbup:
Here's my post on RCG GuerriLLa thread (I didn't wanna re-type it over again ! :veryshocked
WeLL, how long have I been complaining about my right thumb ??
opcorn: Y'all remember.....the 'how far can you bend yours' routine ? MaTTer of fact, I asked Bonedoc for his opinion @ his going away gathering.
And, he said the joint felt 'crunchy'
After he 'manipulated' iT, iT hurt for almost 2 wEEks !So, today, I saw my hand surgeon for a followup on the left hand surgery and I asked about doing xrays (which have never been done !) and he said...sure, lets go. Turns out, he has a clinic right there on his floor !
The xray revealed.....I do indEEd have basal joint arthritis !
And, iT's slightly dislocated !!No worries he says......we'll fix it when I have the next surgery !!
I've placed rectangles (pictured below) over the affected joints. There's supposed to be space (cartilage fills the space) between the bones.
I wiLL advise !
opcorn::thumbup:
Last edited by a moderator: