IMAC Dalton Yak 54, 38% please submit suggestions here....

[orthobird]

ALL THE TAIL servos are installed and programmed! I made the pushrods myself. They are 6-32. Also, the ball links are all DUBRO monster ball links, 6-32. I am not painting the control horns or any of the wood in the inside of the fuselage or the motor-box. The motor box and fuel tank tray has had brushed on, thinned epoxy resin.
I matched the rudder servos using an amp-meter.

 

[capthis]

You're a machine on this building stuff...

 

[BalsaDust]

You're a machine on this building stuff...

Cappy you could be a building machine as well if you weren't so worried about where you will find the next good deal on a used carden.

 

[capthis]

True, and I worked on one thing at a time! I have too many irons in the fire.

 

[orthobird]

If anyone is looking, I have a friend in Oklahoma who is selling a Carden. Let me know if you are interested and I can send you his contact info. It is a Carden

 

[BalsaDust]

If anyone is looking, I have a friend in Oklahoma who is selling a Carden. Let me know if you are interested and I can send you his contact info. It is a Carden

I'm sure cappy is interested. He has a disease. Been diagnosed with "Iwannaowneverycardenthereisitis"

 

[orthobird]

I'm sure cappy is interested. He has a disease. Been diagnosed with "Iwannaowneverycardenthereisitis"

LOL!!!

 

[orthobird]

Ok, here it is for your viewing pleasure, let me know if you want his contact info:

 

[orthobird]

Back on track! I added these plates to the servos.

 

[orthobird]

The motor and all necessary electronics are installed, as well as the CDI, the IBEC's X2, etc....

Next step is to install the telemetric sensors.

Before i forget, i need to make sure i tighten the spark plugs!! do not trust anyone!! well, sometimes, these plugs are not tightened so be sure to always tighten them before you fly!