91" Extra 300-EXP ARF

[Park_Aviator]

Wouldn't these work great?

Savox SA-1230SG Monster Torque Coreless Steel Gear Digital Servo-savsa1230sg


Dimensions(mm): 40.3x20.2x45.0
Weight(g): 79.0
Speed(@4.8V sec/60): .20
Torque(@4.8V oz-in): 416.6
Speed(@6.0V sec/60): .16
Torque(@6.0V oz-in): 500.0
Gear: Unique Steel
Bearing: 2BB
Case: Full Aluminum
25 Tooth Spline

I consisted those... wound up with the 1270s instead

 

[vegasking]

B and E Graphix designed this for me. What you think?

 

[dth7]

B and E Graphix designed this for me. What you think?

View attachment 19018

Love it- a write off!

 

[Drew]

Got my GP61 installed in the 300 this weekend. Wasn't to sure how to set up the throttle and choke on it, but got it figured out. Thought I would share.....

Cut out a small servo arm and bolted it under the existing throttle arm to get a little more resolution. Couldn't go to the furthest hole since it hits the case, but this worked out great. I epoxied a CF rod over the all thread link later to strengthen it.





For the choke, I used a bell crank method and ran the rod down. Works perfect !!!

 

[gyro]

Drew (gapple12) with his 91 and new GP61.

 

[SnowDog]

Great work on the choke setup Drew! and NICE PLANE!

 

[vegasking]

Well my 91 Extra 300 is about 99.6% finished.

DA 60 w/ MTW RE2 pipe
29-9 Falcon Carbon prop w/ 4" Blue Tru-Trun spinner
2 - Futaba R7008SB hv receivers
5 - BLS172SV servos
2 - 2700 2s receiver packs
1- 2700 2s ignition pack
Smart-Fly optical regulated ignition kill switch
32oz. Fourtitude fuel tank

 

[gyro]

looks good! i like the custom vinyl

 

[vegasking]

Gyro, how's that 92 Edge and the gp engine? i finally got the edge, as soon as Tower and UPS take care of my missing 4 - BLS172sv servos I'm going to get started on it.

 

[gyro]

Gyro, how's that 92 Edge and the gp engine? i finally got the edge, as soon as Tower and UPS take care of my missing 4 - BLS172sv servos I'm going to get started on it.

I miss my Edge... http://www.3drcforums.com/showthread.php?p=51446#post51446

GP survived the crash tho. Looking for a new home for it