Pilot 30% Edge 540. Who's Flying it!?

[ChickenBalls]

Hmn. I'm starting to think you both will be flying those Edges before I fly the 330sc.lol

Well I'm push it out towards Fathers Day, cause I need a couple props, BUT I'm ready to start. Speaking of canister's, what ya think of the el cheapo's like Mike at MileHigh sells?

 

[stangflyer]

SWEET! Nice job! Hope to be able to fly half as well as you and Rob @stangflyer do yours at 3 times the altitude. When @ChickenBalls gets his 540 together we will shoot some vid/pics of them together. Way it looks right now with my Ultimate build it may be Nall next year before we get them together.

Ha....!!! Not sure you want to fly like me. I have a tendency to rub the rudder down to a nub. LOL.... Seriously though, just one heck of a kiss ass plane. @Shayne Epley and I put two days of harriers, rudder draggin', full speed knife edge snaps, blenders, knife edge spins and right down harrier landings on ours this weekend. I am not sure I can ever land it normally again. You're going to love this plane.

Bart these bad influences Kelly an Rob, got me all jacked up bout getting mine up, so I went into full throttle getting equipment lined up, got engine Thanks to @emtp275 , @mulehead1969 sponsored me with a 5665, so I'm only a foot rub away from the boss lady letting me order 7954, and 3 SWB arms, and assembly is on.

Wow....!!! Bad influence? I'm telling your wife you are only rubbing her feet to get new plane stuff.

 

[emtp275]

Well I'm push it out towards Fathers Day, cause I need a couple props, BUT I'm ready to start. Speaking of canister's, what ya think of the el cheapo's like Mike at MileHigh sells?

Transition is smoother on the proflow and little more top end but that 55 still ran strong with the cheep can I have

 

[stangflyer]

Well I'm push it out towards Fathers Day, cause I need a couple props, BUT I'm ready to start. Speaking of canister's, what ya think of the el cheapo's like Mike at MileHigh sells?

I bought two of them. One for my 50cc Slick with the DLE 55 and one for the Pilot Edge, DLE 55. My son also has one on his Pilot Edge DLE 55. All turning the same rpm static. 7250. Sound nice, do a really good job and next to no added weight. I think my Edge is just over 16 pounds. I'd say.... "DO IT"!!!

 

[49dimes]

Well I'm push it out towards Fathers Day, cause I need a couple props, BUT I'm ready to start. Speaking of canister's, what ya think of the el cheapo's like Mike at MileHigh sells?

Transition is smoother on the proflow and little more top end but that 55 still ran strong with the cheep can I have

Have you guys checked out the Pinnacle Cans VVRC is offering??? I hear they are just like a pro flow but almost half the cost.
109.95!

 

[49dimes]

Donnie....I also heard that the EME cans did well also but not quite like a pro flow. I think were talking only a 100 rpm or so.
That aint

 

[stangflyer]

This is what I used on my Edge;
http://www.hobbyking.com/hobbyking/store/__20589__50cc_Header_Pipe_s_bend_.html
http://www.hobbyking.com/hobbyking/store/__20588__Alloy_50cc_Tuned_Muffler_Front_Outlet_.html

 

[Jetpainter]

Just picked up the green one at Nall. Can't wait to get her together but, I have to finish my Ultimate build first!

Green one like this?

 

[ChickenBalls]

I bought two of them. One for my 50cc Slick with the DLE 55 and one for the Pilot Edge, DLE 55. My son also has one on his Pilot Edge DLE 55. All turning the same rpm static. 7250. Sound nice, do a really good job and next to no added weight. I think my Edge is just over 16 pounds. I'd say.... "DO IT"!!!

Good just aquired oneneed a header @49dimes where did you get your header?

Have you guys checked out the Pinnacle Cans VVRC is offering??? I hear they are just like a pro flow but almost half the cost.
109.95!
View attachment 25314

There is 2 med pro flow on that other site now for $220 look in good shape

 

[49dimes]

Good just aquired oneneed a header @49dimes where did you get your header?

There is 2 med pro flow on that other site now for $220 look in good shape

I looked at over 120 listings on HK before I found it! 15$I think they still have em!