gyro
GSN Contributor
Can anyone give me a link to the servo arms that would work best for this plane with savox 1258TGs? Thanks in advance
I'm using these right now: http://www3.towerhobbies.com/cgi-bin/WTI0001P?I=LXD668&P=8
71" AJ Slick Building, Flying, and Questions
- Thread starter AZAerobat
- Start date
I'm using these right now: http://www3.towerhobbies.com/cgi-bin/WTI0001P?I=LXD668&P=8
SteveT.
100cc
Can anyone give me a link to the servo arms that would work best for this plane with savox 1258TGs? Thanks in advance
Spot-on Aluminum arms single arms and Spot-on double arms, as sold by Aztech Aermodel. a sponsor of 3DRCForums...
zmonster97
Member
Is .75 in enough though? That's the max size for the single arms.
gyro
GSN Contributor
Yes, those would work also! I have some I just got for my Velox, and they look great.
You can get the single arm from 1 inch, up to 1.75 inches... I think you may be mistaken.
Yes, it is for the double arms. On the single arm, you can use M3. The bolt size is selectable.
zmonster97
Member
Oh, yup. I was clicking on the 2-56 size and the only choices for that are .50 in and .75 in.
AZAerobat
50cc
These are the guys I am using on my 1258TG's. If you do not mind waiting a bit they are great because you can cut them to length you need. I am not a big fan of the purple but you can't see it in the air unless you are close.
Single Arm
Double Arm
Single Arm
Double Arm