• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Stevendavis

    Addiction XL Build??

    Next I test fitted the motor to the motor box, and noticed that part of the glue joint must be removed to get the motor mount to sit flat on the motor box.
  2. Stevendavis

    Addiction XL Build??

    Here's the method I used to glue on the fiber reinforcements on the Katana. Put a piece of wax paper over top, a piece of foam, then scrap ply, and use rubber bands to keep pressure on the assembly. I also like to use glass resin for the fiberglass.
  3. Stevendavis

    Addiction XL Build??

    Ok, I decided to work on the motor mount next, as it takes several steps to complete. First step is to glue in 4 small pieces of fiberglass on the inside corners of the firewall. Use extra epoxy to reinforce the motor box joints throughout. Next, epoxy on the fiber reinforcements. Then epoxy on...
  4. Stevendavis

    Addiction XL Build??

    Prepped the carbon horns and got them glued in. I used a round file to open up the clevis pin hole just a tad. Prepped the rods as per instructions, and got them glued in with epoxy. The carbon rods were just the right length in this one, no need to cut any off. I also had to drill the carbon...
  5. Stevendavis

    Scale Bud Nosen 1/4 Scale Cub?

    Wonderful !! Thank you soooo much for doing this! I owe you bigtime!
  6. Stevendavis

    Addiction XL Build??

    Just can't beet em for grab and go fun!
  7. Stevendavis

    Addiction XL Build??

    Next step is to work on the aileron servo installation. I opened up the servo hole by cutting down the center, then a diagonal cut from the corners to the center and ironing it all down into the servo hole. Once the servo is in place. Use a small drill bit to pre-drill the holes for the servo...
  8. Stevendavis

    Addiction XL Build??

    With all the PA aircraft, they recommend no gap between the control surface and flying surface, and want 50* of travel. But it's not possible without re-shaping the leading edge of the ailerons and elevator. I choose not too, and just get what I can on throws. It's usually about 35 to 40* max...
  9. Stevendavis

    Addiction XL Build??

    Yep, got the new 60 motor and new 80amp ESC. I've been flying the Addiction X for years now. The wife got me the XL for Christmas this year. I've been wanting one for some time now. I've also been flying the Katana MX for a couple of years. Love the PA aircraft!
  10. Stevendavis

    Addiction XL Build??

    I know this isn't Giant Scale, or Gas Powered, but is anyone interested in a build thread? And can I post it here, or is there a better place? I'm taking a break from the Cub and have started assembly of this one for Spring time flying. Blessed day to all!
  11. Stevendavis

    Scale Bud Nosen 1/4 Scale Cub?

    I sent them out via USPS in a padded envelope. I live kind of in a remote area, so it may take a few days, but it's on its way to you.
  12. Stevendavis

    Scale Bud Nosen 1/4 Scale Cub?

    Yep and Yep! Square would be best for fitment. Thanks a bunch for doing this for me! :angel:
  13. Stevendavis

    Scale Bud Nosen 1/4 Scale Cub?

    Thanks Tony, Just shoot me your mailing address and I'll get them out to you. The Robart axle is too short, so I have to use the Airtop Axles. Just turning down the threaded part, plus maybe 1/8" will do great! Thank you!
  14. Stevendavis

    Scale Bud Nosen 1/4 Scale Cub?

    Can one of you guys, with a lathe, machine down these Airtop axles, "just the threaded portion", to the same size as the Robart axle? The Robart axle is 3/16" and the Airtop axles are 1/4".
  15. Stevendavis

    Scale Bud Nosen 1/4 Scale Cub?

    More goodies showed up today.
  16. Stevendavis

    Scale Bud Nosen 1/4 Scale Cub?

    The Morrisey is a great plane. The modern gassers are a great match for the older kits. I've also built quiet a few of the Sig kits in the past! One of my favorites is the Spacewalker.
  17. Stevendavis

    Scale Bud Nosen 1/4 Scale Cub?

    Thanks Mike! Yep, It's the Robart gear for the Balsa USA Cub. The Tailwheel assembly is from Sig.
  18. Stevendavis

    Scale Bud Nosen 1/4 Scale Cub?

    I did get the leading edge sheeting and cap strips on today. Oh, and some goodies showed up!
  19. Stevendavis

    Scale Bud Nosen 1/4 Scale Cub?

    I agree! But you are doing "Way" more detail and work than me!! I do have a set of plans for the 1/3 scale Cub, but watching your build is making me rethink why I got them. It's a very ambitious build for my skills.
  20. Stevendavis

    Scale Bud Nosen 1/4 Scale Cub?

    Thanks Snoop! Flat bottom wings are a nice change!
Top