• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    .060" diameter, phillips head. Managed to get the rear formers installed in between watching the grandsons, actually the two year was helping this morning when his brother was in preschool. The cabin roof will go on next, set the wing incidence and fill in the vertical sticks that hold the...
  2. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    The fabric on the Champ is screwed to ribs rather than stitched. The full scale uses #4 screws.
  3. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    I found a 4 1/2" carbon fiber spinner at the MARC's RC auction on Saturday, $20, couldn't pass it up. Sounds like you will be hitting the Micro Fastener booth, I plan to do so as well, still need a couple hundred on #0 screws for the wings. I have about 1000 already, can't wait to put these...
  4. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Thank you, I am enjoying this build, makes me want to get out of bed early. Don't buy everything, leave something for me!!!
  5. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    The grandsons were here today, not much work done. They do keep you moving. Did manage to get four formers cut out tonight after dinner. Once these are installed then the cabin roof will be installed, then the dash, then sheet interior with 1/32" plywood that I need to order.
  6. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    What day are you going to Toledo? I hope to be there on Saturday.
  7. TonyHallo

    Scale Pitts S1-T, S1-S, and a Challenger.

    Wow that's great!!!!
  8. TonyHallo

    Scale 1/3 Scale Extra 330L Build.

    That is going together quickly, nice work.
  9. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    I still ordering supplies for this build, ordered stainless steel streamline tubing last week for Toni Clark, $35.00 shipping ouch! Need servos, covering supplies, some more wood, paint (May use latex?)
  10. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Don't know, would like to put the fabric on when the weather is good and I can work outside.
  11. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    The steak and lobster fest took it's toll on today's productivity, did manage to get the fuselage sitting on the front paws and hind leg. Switched the drawings around, removed the plan section and got the sectional drawing taped down. Added the gussets to the top longerons. There was no...
  12. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    The firewall and stringers are in. It is easier to draw the plane than build it. The plans show a nice radius on the stringers with everything else being nice straight lines. There was no way that was happening. To control the bending the straight formers were added in front of the bend, saw...
  13. TonyHallo

    Scale 1/3 Scale Extra 330L Build.

    Very nice.
  14. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Ran out of work on the boat sooner than I thought, back home at 1300 so got more done this afternoon. Installed the formers on the bottom side, the stringers and firewall are next. Also added gussets to the bottom longerons, these glue on three sides plus grab the cross braces. Finally the...
  15. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Got up early today and installed rear fittings and tail wheel mount. The rear fittings also act as the lift strut attachment so it is in tension when flying, the plans showed an additional 3/8" thick piece of wood on top for the 3/8" x 3/8" and 1/4" x 3/8" spruce cross pieces, I thought it was...
  16. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Managed to get the last six landing gear fittings finished tonight after the grandsons went home, mounted the struts on the front fittings, really like the way they work. After looking at various planes on airliners.net decided the Cub tires just would not look right, found these DuBro 5 1/2"...
  17. TonyHallo

    Scale 1/3 Scale Extra 330L Build.

    I use tee nuts and red loctite, can't say that I've had any major problem, my Christen Eagle was built in 2005 and my One Design was built in 2008.
  18. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Got a little done this AM, silver brazed the main strut bearing together, a 3/16" piece of plywood is sandwiched between the steel plates and a 3/8" x 3/4" spruced is backed, everything is jointed with 4-40 screws. Everything got painted with epoxy before assembling, the assembly got mated with...
  19. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Here are the first six still screwed together, the are resting on the newly installed 1/8" lite floor. The plans call for 1/8" aircraft plywood floor, just didn't see the need for that. The floor ties the lower longerons, cross pieces and firewall together. It is about 27" long and installed...
  20. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    On Monday and Wednesday we watch the grandsons, 4 and 2 years old, they were wound up today didn't get much done, spent the evening making 1/16 steel fittings for the landing gear mounts, need 12 pieces in total, still have 6 to go. I cut the blanks oversized, drilled and screwed together then...
Top