• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. gyro

    Redwing RC 30cc (76") Extra 330sc

    I could definitely tell the difference in straight line tracking after the modification. no more searching for trim with power changes. a pleasant improvement. I wouldn't say, "much" but rather "enough" to be familiar with it. It flies differently than the 50cc version, which I prefer over...
  2. gyro

    Extreme Flight 76/83" MXS

    Sweet. I'm like my DA-35 also... Plenty of oomph on the 20x9 Falcon. :)
  3. gyro

    Article: DOC AUSTIN - Testing: Hi Tec's New HS5070MH Servos

    48" Extreme Flight Edge - Sweet :) I do.... But you asked the same question in a different way so I figured I'd change my answer up too :) I've got some EXTENSIVE experience with the 2820 motor.... Used every published wind from 650 through 950, and some others that were just for test. I...
  4. gyro

    Article: DOC AUSTIN - Testing: Hi Tec's New HS5070MH Servos

    Nope... gotta keep it high and fast... and wont rip at all. :facepalm:
  5. gyro

    Article: DOC AUSTIN - Testing: Hi Tec's New HS5070MH Servos

    48" Extreme Flight Edge - Sweet :) Nope But Dougbo has my old plane... Maybe he can confirm to you what I'm suggesting? :)
  6. gyro

    Extreme Flight 76/83" MXS

    I forget and I'm too lazy to look... :) Pipe?
  7. gyro

    Extreme Flight 76/83" MXS

    Nice flying Joe :) 20x9 falcon?
  8. gyro

    Article: DOC AUSTIN - Testing: Hi Tec's New HS5070MH Servos

    The 14x7 is harder on the motor due to gyroscopic forces from the extra diameter. Like I said, the 13x6.5 is the ticket for me. I use the 870kv wind one with NO PROBLEMS: [http://shop.subsonicplanes.com/product.sc?productId=404 Yes, absolutely! I would for all the EF 48" EXP series.
  9. gyro

    Article: DOC AUSTIN - Testing: Hi Tec's New HS5070MH Servos

    The 13/6.5 on an 833kv wind is my personal favorite... And is bullet proof even in 100F outdoor temps.
  10. gyro

    Extreme Flight 76/83" MXS

    I like your style Tom :D
  11. gyro

    Aeroworks 60cc Freestyle Extra 260 QB-L

    Thanks!
  12. gyro

    Sugesstions for a 60" EF 3D plane

    Try working a small wooden dowel with some fine grit sand paper down the receiver tube in the wing that isn't fitting properly
  13. gyro

    Sugesstions for a 60" EF 3D plane

    Remove the weight, go fly, evaluate. It should be fine without it. I didn't need weight in mine, flew the same batts.
  14. gyro

    Sugesstions for a 60" EF 3D plane

    airboss is plenty fine for your application. The 5245 is one of EF's recommended servos, they've done plenty of testing on it. If you want to remove the castle bec, just cut the wires off where they're attached to the main ESC leads, and remove it (apply electrical tape where needed). Then...
  15. gyro

    Aeroworks 60cc Freestyle Extra 260 QB-L

    Went to the field yesterday, and my buddy Jose (@UCPILOT110) was there with ANOTHER new plane (he's almost as bad as me).... and this time it was a real beauty. Check out some photos I got of his new AW Extra 260:
  16. gyro

    Aj aircraft 93,73,56 laser

    Yes... I have one switch trigger my low - mid - high rates like you, but each surface has a different amount of expo... rudder gets a little more than elevator, etc... :)
  17. gyro

    Aj aircraft 93,73,56 laser

    I agree, the rolls were crazy. Fwiw, I fly my rudders at 80% expo too, so that rules that out
  18. gyro

    NEW Twisted Hobbys 39" Crack Yak WOW

    Congrats! Hovering already? You heli guys.... ;)
  19. gyro

    Aj aircraft 93,73,56 laser

    Quite possibly
  20. gyro

    Aj aircraft 93,73,56 laser

    I agree with the above but would say "sufficient" rather than "plenty". It took a fair amount of rudder just to hold regular KE, or at least it seemed that way to me.... But I only flew it very briefly.
Top