3DHS --FLY LOW-- Always OFF TOPIC

[Diggity]

Well, let me back up a bit. The DLE 111 has about 4 hrs on it. So there was no need for break in. But the airframe and most all power system is brand new. But I was very tense.

 

[gyro]

Well, let me back up a bit. The DLE 111 has about 4 hrs on it. So there was no need for break in. But the airframe and most all power system is brand new. But I was very tense.

I can't fly like that loose as goose.

 

[SnowDog]

No, haven't done anything with it yet. It's was a clean break and probably fixable with some time. But not sure what I'm going to do with it yet. But on a lighter note, I maiden my 104 Slick today and fell in love. I took it pretty easy on her, nothing to crazy while I'm still trying to dial it in. Here is a video link:
http://www.youtube.com/watch?v=C1q_P_47G9k

Dibs on the trash can! Let me know if you don't want to fix it!

 

[Santi8]

3DHS --FLY LOW-- Always OFF TOPIC thread

Made some decent progress on my 89" Today...

 

[quadracer]

3DHS --FLY LOW-- Always OFF TOPIC thread

That's a beauty Santi. Let me know if you don't like it. I'll relieve you of it.

 

[hone]

That looks awesome dude! :clap:

 

[wedoitall]

Maiden Successful

got to maiden the edge and osiris today! first time fly'n balsas, WOW! :beatingheart: it was pretty windy, almost called it off, but when i got to the field i had to at least try one battery. ended up flying about 10

im in love.

was kinda nervous about landing on the 100ft concrete pad i use. the edge wasnt a problem about 20ft or less for scale and just a few ft for harrier landing(glad it had the wire gear). The Osiris i used almost every inch of the 100ft. gotta wait till it drys out alil bit before i can try to work on the grass runway. telemetry and a watt meter is pretty nice also. gotta save up my pennys and get a decent video camera.

 

[hone]

Sweet glad it went well! I found my Osiris cut through the wind without a problem and tracked great! Although the landings are long they are super stable and easy.

 

[gyro]

3DHS --FLY LOW-- Always OFF TOPIC thread

got to maiden the edge and osiris today! first time fly'n balsas, WOW! :beatingheart: it was pretty windy, almost called it off, but when i got to the field i had to at least try one battery. ended up flying about 10

im in love.

was kinda nervous about landing on the 100ft concrete pad i use. the edge wasnt a problem about 20ft or less for scale and just a few ft for harrier landing(glad it had the wire gear). The Osiris i used almost every inch of the 100ft. gotta wait till it drys out alil bit before i can try to work on the grass runway. telemetry and a watt meter is pretty nice also. gotta save up my pennys and get a decent video camera.

Hooray!!!!

 

[wedoitall]

Sweet glad it went well! I found my Osiris cut through the wind without a problem and tracked great! Although the landings are long they are super stable and easy.

yea it was alil more stable than the buck 50. both were a blast. i say the wind helped me harrier land the edge tho. the concrete pad wouldnt worry me too much on the osiris but its about 8 inches above the ground. so if i over shoot it may get damaged alil. my buddy said i was brave, after i got cg decent was doing 4 point rolls, need to learn wind correction on those. think i neeed a longer servo horn for the rudder. i could only get about 40 degrees on the controls, on the outer hole and end points set at 150 %