• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!
  • Unless you are a paid advertiser NO more posting advertisement in the individual vendor forums. You may post in the Manufacturer's Announcements section only but only ONCE a month unless your a paid advertiser.

71" AJ Slick Building, Flying, and Questions

Just un boxed my 71 slick
Im planing on going with a 4330 on 6s.
would I be able to get proper CG with the rudder servo in the tail with a 6s setup
 

gyro

GSN Contributor
Just un boxed my 71 slick
Im planing on going with a 4330 on 6s.
would I be able to get proper CG with the rudder servo in the tail with a 6s setup

With a big enough pack pushed forward... Yes. Use a 6s6000 or so just to be safe.
 

Manta

70cc twin V2
I think so. 4430 is a little heavier than the 4325 so tjat will offset the rudder servo in the back. Lotsa room for battery adjustment
 

Pete

50cc
Just un boxed my 71 slick
Im planing on going with a 4330 on 6s.
would I be able to get proper CG with the rudder servo in the tail with a 6s setup

Hi rcpilot_971. Could you be so kind to let me know where I can purchase a Motorfly 4430 or 4330 outrunner please? Or if anyone knows please post. I have a new project and burned too many of my own motors already. Thanks everyone!

Regards,

Pete
 

skibum44

70cc twin V2
Yep Ken has great service to and could wind them to what ever you need. My 4330-216 has been in service for nearly two years and has over 700 flights on it. Tested it last weak and it pulled 23lbs 6oz and settled in close to 23lbs. Always runs cool for me to.
 
Top