Elevator push rod components. Ok here is where I almost messed up!! I wasn't paying attention and used one the threaded aileron connectors on the smaller carbon push rods. I figured it out pretty quick and was able to save it.
Threaded connector pictured here is for the aileron connecting rods. E1-E5 stand offs are for the elevator, the unmarked ones are for the rudder.
Again, threaded connector pictured is the wrong one for the elevator.
Stand offs glued in place, I use foam-tac so there is no chance of CA wicking up and gluing the carbon rod to the stand offs.
Rudder push rod components. Correct threaded connector shown
For reference: the top longer threaded connector is for the aileron connector rods