Welcome To GiantScaleNews.com

GSN is the BEST in an RC online community. Less corporate BS and more down home fun. Better conversations with REAL RC'ers. Don't settle for the biggest when you can have the best!
  1. If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!


Scale Nelitz 1/3 scale Cub build

Discussion in 'Giant / Scale Scratch and Kit Build Threads' started by dhal22, Feb 9, 2018.

  1. dhal22

    dhal22 GSN Sponsor Tier 1

    Running out of 3/8" spruce so harvesting some from the crooked wing spar that RCaiir replaced for free.

    -Rick- likes this.
  2. dhal22

    dhal22 GSN Sponsor Tier 1

    Shop's a mess from summer house projects, made a huge deposit into my neglected TD Ameritrade the day before the stock market took a dump and went on a buying frenzy. In other words no Cub work for months. I finally did something, built the last 3 hinge pieces for the elevator tonight. Yay for me!

    TonyHallo, pawnshopmike and AKNick like this.
  3. Off to a good start!
  4. dhal22

    dhal22 GSN Sponsor Tier 1

    Not a lot, just some more hinge work.

    hinge 12-12-20.jpg
    WMcNabb, -Rick- and pawnshopmike like this.
  5. -Rick-

    -Rick- 70cc twin V2

    You say not a lot, but I would not have the talent to do that.
    dhal22 likes this.
  6. dhal22

    dhal22 GSN Sponsor Tier 1

    Gluing hinges tonight, I have learned to let the JB Weld solidify somewhat then squeeze the brass tube tight to the dowel.


    AKNick, WMcNabb and pawnshopmike like this.
  7. dhal22

    dhal22 GSN Sponsor Tier 1

    Working on the other elevator half.

    -Rick-, Snoopy1 and pawnshopmike like this.
  8. dhal22

    dhal22 GSN Sponsor Tier 1

    Using the little mini mill I acquired a couple of months ago. A 3/8" end mill is a WHOLE LOT EASIER than a 3/8 round wood rasp!

    -Rick-, AKNick, Snoopy1 and 2 others like this.
  9. dhal22

    dhal22 GSN Sponsor Tier 1

    Perfect joint, I like this idea.

    -Rick-, AKNick, pawnshopmike and 2 others like this.
  10. WMcNabb

    WMcNabb 150cc

    TN, USA

Share This Page