If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

Welcome!

TonyHallo

150cc 67 From Springdale PA

Joined: Aug 26, 2014

Last seen: Today at 5:27 AM

Latest activity Postings About

- TonyHallo replied to the thread Scale Wendell Hostetler 30% PA-28 Cherokee Build.
  
  If I can do it in OpenTX in will not require any additional hardware switches and thought. When the flaps are deployed will act as the...
  
  Tuesday at 10:22 AM
- TonyHallo reacted to AKNick's post in the thread Scale Nelitz 1/3 scale Cub build with Like.
  
  It's just very difficult to trim post layup and as far as the wetting it's not as spongy as glass... Would be neat to laminate it in...
  
  Monday at 7:28 AM
- TonyHallo reacted to dhal22's post in the thread Scale Nelitz 1/3 scale Cub build with Like.
  
  Transition complete. Pin could be shorter but no rush.
  
  Monday at 7:28 AM
- TonyHallo replied to the thread Scale Nelitz 1/3 scale Cub build.
  
  Never used Kevlar, how does it wet out? Think my next build might be a fiberglass fuselage layup and was considering Kevlar fabric.
  
  Sunday at 8:30 AM
- TonyHallo replied to the thread Scale Nelitz 1/3 scale Cub build.
  
  What did you wrap the brass tube with?
  
  Sunday at 6:35 AM
- TonyHallo replied to the thread Scale Wendell Hostetler 30% PA-28 Cherokee Build.
  
  Yes they did, but this is not old school, it's new school where everybody gets a trophy!
  
  Jul 28, 2022
- TonyHallo replied to the thread Scale Wendell Hostetler 30% PA-28 Cherokee Build.
  
  I would like to do it without using another switch and one more thing to think about. SA -Flaps, SB - Ignition, SC - Rates, SD -...
  
  Jul 28, 2022
- TonyHallo replied to the thread Scale Wendell Hostetler 30% PA-28 Cherokee Build.
  
  I seen this on YouTube and thought I might try it on the the Cherokee, Assan AG61 anti slip nose wheel gyro. It has two inputs, rudder...
  
  Jul 27, 2022
- TonyHallo replied to the thread Scale Nelitz 1/3 scale Cub build.
  
  That came out very nice!
  
  Jul 27, 2022
- TonyHallo reacted to dhal22's post in the thread Scale Nelitz 1/3 scale Cub build with Like.
  
  Some milling attempts. Item is too small after all the work but the next one will be better.
  
  Jul 27, 2022
- TonyHallo reacted to dhal22's post in the thread Scale Nelitz 1/3 scale Cub build with Like.
  
  Milling and threading. I slightly over cut the threaded rod area, so confirming a test run. . I used the mini lathe to hold the die.
  
  Jul 27, 2022
- TonyHallo reacted to dhal22's post in the thread Scale Nelitz 1/3 scale Cub build with Like.
  
  The head stock will rotate, all though I couldn't figure that out last night. So I moved the x and y handles at the same time. Just...
  
  Jul 27, 2022
- TonyHallo replied to the thread Scale Nelitz 1/3 scale Cub build.
  
  Does the mini lathe have a compound?
  
  Jul 26, 2022
- TonyHallo reacted to dhal22's post in the thread Scale Nelitz 1/3 scale Cub build with Like.
  
  Big lathe and mill are about 3 miles away at my shop. Almost need a collet for this work. Some cutting but stopped shy and took the...
  
  Jul 26, 2022
- TonyHallo replied to the thread Scale Wendell Hostetler 30% PA-28 Cherokee Build.
  
  Have the exhaust worked out. The tubing is high temperature silicon from McMaster Carr. Weight came at 29 pounds and the CG is spot...
  
  Jul 24, 2022
- TonyHallo reacted to dhal22's post in the thread The 'What did you do in your workshop tonight?' thread with Like.
  
  A little bit of free time this week. Slowly moving my mill to its future home. Had to cut a larger opening at my shop and lean the...
  
  Jul 20, 2022
- TonyHallo replied to the thread Scale Wendell Hostetler 30% PA-28 Cherokee Build.
  
  I have engine mounted, need to hook up the servos and exhaust then do another weight and balance check. The carburetor kit arrived...
  
  Jul 19, 2022
- TonyHallo reacted to Appowner's post in the thread Scale Wendell Hostetler 30% PA-28 Cherokee Build with Like.
  
  Yeah! Tall ceilings are a must. I have an RC sailboat waiting final rigging because only a couple of rooms in the house will...
  
  Jul 18, 2022
- TonyHallo replied to the thread Scale Wendell Hostetler 30% PA-28 Cherokee Build.
  
  This is what I came up with to stand the fuselage on the tail. Making standoffs for the new engine.
  
  Jul 18, 2022
- TonyHallo replied to the thread Scale Nelitz 1/3 scale Cub build.
  
  Chuck the bar, make a 45 degree cut about half of the radius of the bar, then finish round with a file. Make the round end as your first...
  
  Jul 18, 2022
- TonyHallo replied to the thread Scale Nelitz 1/3 scale Cub build.
  
  You can make a swell lift fork on your 1440 lathe.
  
  Jul 17, 2022
- TonyHallo reacted to dhal22's post in the thread Scale Nelitz 1/3 scale Cub build with Like.
  
  Temporarily threaded in 2-56 until I decide what to do. And back to the intended usage.
  
  Jul 17, 2022
- TonyHallo replied to the thread Scale Wendell Hostetler 30% PA-28 Cherokee Build.
  
  It wasn't so much the weight of the but tail weight would have been needed in addition to relocating the throttle, choke and nosewheel...
  
  Jul 17, 2022
- TonyHallo replied to the thread Scale Wendell Hostetler 30% PA-28 Cherokee Build.
  
  First -3" to 6" https://www.falconpropellers.com/product/falcon-gas-2-blade-carbon-spinner/ Second -The Roto weights 7.6 pounds. I have...
  
  Jul 16, 2022
- TonyHallo reacted to BalsaDust's post in the thread Discussion The I’m Going/Went Flying Thread with Like.
  
  It's been fun for sure. Sadly it has to sit for a few days now. Went back out yesterday and got 3 flights in. I had noticed the day...
  
  Jul 15, 2022
Show older items
Loading…
Loading…