3dbandit
100cc
What about moving in on the servo arms? With those huge elevators I think you can get by with a few degrees less deflection.
Aeroplus 60cc / 92" Edge 540 V3 from Limitless Aero
- Thread starter gyro
- Start date
What about moving in on the servo arms? With those huge elevators I think you can get by with a few degrees less deflection.
bbrown2828
150cc
What servos u using
gyro
GSN Contributor
Good idea, thanks Jacob, I'll do that in the morning.
Savox sc-1268sg
bbrown2828
150cc
Bump up to b the 1231 or 1230 if you need more or maybe the 1283
gyro
GSN Contributor
I'll send you the bill
gyro
GSN Contributor
shifted the elevators to the 1.75" slot, working much better now. still obscene throw, and no impact that I can tell in flight except no more flutter.
So far, this is by far the easiest airplane I've ever hovered. It just parks, and the big controls make corrections easy simple.
GP61 is the perfect engine for this plane, a pure joy with PLENTY of power.
Kinda early to say after only two flights, but this plane is right up there with my other 92" Edge right now as a far as capability and fit for my flying style. It's just AWESOME.
So far, this is by far the easiest airplane I've ever hovered. It just parks, and the big controls make corrections easy simple.
GP61 is the perfect engine for this plane, a pure joy with PLENTY of power.
Kinda early to say after only two flights, but this plane is right up there with my other 92" Edge right now as a far as capability and fit for my flying style. It's just AWESOME.
Yowzilla
50cc
The spec on my Savox is the same at 347 in-oz @ 7.4v. But I got the 1271TG ones...
Let us know how the flutter plays out over a few flights. EDIT: Sorry, I just read your post...moving to 1.75" reduced issue...
It is a mazing how quick one can strip all the servos, receiver, IBEC, and telemetry from a busted airframe. Two weeks to build and 45 min to strip. It looks like I parked my Edge in a bad neighborhood...
Let us know how the flutter plays out over a few flights. EDIT: Sorry, I just read your post...moving to 1.75" reduced issue...
It is a mazing how quick one can strip all the servos, receiver, IBEC, and telemetry from a busted airframe. Two weeks to build and 45 min to strip. It looks like I parked my Edge in a bad neighborhood...
Last edited by a moderator:
WrongWayRc
50cc
Cool!!
Yowzilla
50cc
My first building impressions are that this is better than the 3DHS in innovation, build quality, and fit!!
The first thing I noticed was that the rudder rod practically fell into place! With the other ARF's this is a chore to push the rod in each hinge. These lined up like it was built with a good fixture.
The magnet SFG and wing tips are innovative. Mix and match
The quality of wood and or the Accuracy of cutting is the best I have seen. The servos fall into place with no need to custom fit.
The first thing I noticed was that the rudder rod practically fell into place! With the other ARF's this is a chore to push the rod in each hinge. These lined up like it was built with a good fixture.
The magnet SFG and wing tips are innovative. Mix and match
The quality of wood and or the Accuracy of cutting is the best I have seen. The servos fall into place with no need to custom fit.