The 3DRCForums -Discuss Anything Thread-

[3dNater]

How much does your motor weigh Mike?

 

[FlyMike1]

49 grams so maybe not..

ExtraVaganza
By
TELINK
Specifications
Wing span – 48†/ length – 45†/ AUW 25oz
250 - 450w outrunner motor (78g – 100g)
30 - 45 amp ESC / 3s 1600 – 2500mAh battery
4 ch radio / 4x Metal Gear 14g – 18g servos
11 x 4.7 – 12 x 5 prop

 

[3dNater]

Ya your motor unfortunately sounds a little too light.

 

[FlyMike1]

This one will work....
http://www.twistedhobbys.com/RCF-39-EPP-Edge-540-RCF-39-Edge-540.htm

 

[3dNater]

yep, you just might need to run a slightly smaller prop if your motor is getting real hot.

 

[gyro]

Taking 5 planes to the field tomorrow, in my first flying day in over 3 weeks. I've been busy at home looking after my kids (and getting some building done) while my wife recovered from a surgery which prevented her from lifting.

So for tomorrow:

Maiden Flights:

Aerobeez 71" Extra, with my super DLE30 (previously in my 72" Extra), and Align DS610s all around,
Aerobeez 74" Extra, with new VVRC 40cc, Hitec HS-5565MH all around, and new [MENTION=1155]Fromeco[/MENTION] Badger switch
3dhs 92" Edge 540 (replacement airframe), with my trusty GP61 and Hitec HS-9370TH all around

"Re-Maiden"
3dhs 70" Velox with Savox SC-1258TG Servos (moved the HS-5565MH into the Slick above)
3dhs 72" Extra with new AGM 30cc from @ibcinyourc

Should be a busy morning!

 

[dth7]

Taking 5 planes to the field tomorrow, in my first flying day in over 3 weeks. I've been busy at home looking after my kids (and getting some building done) while my wife recovered from a surgery which prevented her from lifting.

So for tomorrow:

Maiden Flights:

Aerobeez 71" Extra, with my super DLE30 (previously in my 72" Extra), and Align DS610s all around,
Aerobeez 74" Extra, with new VVRC 40cc, Hitec HS-5565MH all around, and new [MENTION=1155]Fromeco[/MENTION] Badger switch
3dhs 92" Edge 540 (replacement airframe), with my trusty GP61 and Hitec HS-9370TH all around

"Re-Maiden"
3dhs 70" Velox with Savox SC-1258TG Servos (moved the HS-5565MH into the Slick above)
3dhs 72" Extra with new AGM 30cc from @ibcinyourc

Should be a busy morning!

Good luck. Will wait for the reports. You'll need a scribe!

 

[hone]

This one will work....
http://www.twistedhobbys.com/RCF-39-EPP-Edge-540-RCF-39-Edge-540.htm

yep, you just might need to run a slightly smaller prop if your motor is getting real hot.

Yeah that one would be in the right size for your motor. The kv on your motor is a little high though so you probably won't be in the recommended prop size range.

 

[skibum44]

Good luck Gary... I would like to hear what you think of the hs-5565mh servos. Speed looks great and torque appears high enough where it wouldn't see any blowback.

 

[aronph]

I havent flown in like 4 months