• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Gp-61

ok its all fixed guys its pulling fuel better and running with the cowl on ,, im headed to the field thanks for the help
 

3dNater

3DRCF Regional Ambassador
ok its all fixed guys its pulling fuel better and running with the cowl on ,, im headed to the field thanks for the help

Glad its working! Sounds like it just needed a little tightening on those carb bolts as air was slipping past the gaskets.
 
Welp it will start and run and fly but when I go into a vertical and them as soon as I go over the top and head to a down line it dies at idLE EVERY TIME
 

gyro

GSN Contributor
I also use an idle up. The GP idles so smooth at 1500, it's tempting to leave it there, but I like it a 1800rpm in flight.
 
uploadfromtaptalk1398033803864.jpguploadfromtaptalk1398033856537.jpguploadfromtaptalk1398033885317.jpg
 
Top