• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Scale Bud Nosen 1/4 Scale Cub?

Finally got the stab glued on last night. Got buisy on the fin and rudder. I added some extra material for the hinges, and got the hard point installed on the fin, for the tail brace wires. Still thinking about how I want to go about the fillet on the sides of the fin. Also got the rudder drill jig made, but still have to use it.
 

Attachments

  • Glue.jpg
    Glue.jpg
    589.3 KB · Views: 135
  • Rudder (2).jpg
    Rudder (2).jpg
    698.1 KB · Views: 114
  • Rudder1 (2).jpg
    Rudder1 (2).jpg
    658.7 KB · Views: 121
  • Rudder3 (2).jpg
    Rudder3 (2).jpg
    408.6 KB · Views: 141
Got the fin in place and made a fillet for the transition area. Spent quite a bit of time getting the side fillets for the fin made but I think I'm ok with how they turned out. Got them glued in place, then worked on the hinging bevles.
 

Attachments

  • IMG_6208 (2).jpg
    IMG_6208 (2).jpg
    626.4 KB · Views: 109
  • IMG_6210 (2).jpg
    IMG_6210 (2).jpg
    591.9 KB · Views: 113
  • IMG_6214 (2).jpg
    IMG_6214 (2).jpg
    649.2 KB · Views: 111
  • IMG_6215 (2).jpg
    IMG_6215 (2).jpg
    690.6 KB · Views: 111
  • IMG_6218 (2).jpg
    IMG_6218 (2).jpg
    681.1 KB · Views: 122
Got a little strut work done. Added some extra backing wood for the mounting areas. The right side is about done. Still have more to do on the left side.
 

Attachments

  • Cub 51 (2).jpg
    Cub 51 (2).jpg
    372.4 KB · Views: 129
  • Cub 50 (3).jpg
    Cub 50 (3).jpg
    419.6 KB · Views: 104
  • IMG_6293 (2).jpg
    IMG_6293 (2).jpg
    370.1 KB · Views: 112
  • IMG_6294 (2).jpg
    IMG_6294 (2).jpg
    321.4 KB · Views: 120
  • IMG_6295 (3).jpg
    IMG_6295 (3).jpg
    366.4 KB · Views: 143
Top