• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. TonyHallo

    Mini lathe (and mill) discussion.

    David, What is to finish on the OD of the material?
  2. TonyHallo

    Mini lathe (and mill) discussion.

    That 11 x 30 looks real nice Steven.
  3. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    Did you fly it like you sold it?
  4. TonyHallo

    Scale 112” - Taylorcraft by HeyLuc & Snoopy.

    Learned something today. Didn't know there was such a thing. Wonder what that cost the taxpayers?
  5. TonyHallo

    Scale BUSA Super Cub

    Here's a short video from yesterday and the reason why I'm going down this route. It will idle just at 1000 rpms, I raised the idle here to keep the rpm telemetry active, using a Frsky SP-RPM sensor designed for electric motors so it drops to zero below 1000 RPM. The sensing wires are hooked...
  6. TonyHallo

    Scale BUSA Super Cub

    Never ran it, thinking about putting in the next Cherokee. I have the Johnson mufflers but cut the stacks off to fit the scale exhaust in the Super Cub. All in weight, engine, mufflers, and ignition is 4.7#, over 1# lighter than the D&B 3.7 I was using.
  7. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    Pretty sure the spacers are there to make room for the ne Walbro Carb.
  8. TonyHallo

    Scale BUSA Super Cub

    The ring came off the cowl just fine. A new 1/4" plywood firewall was cut to the traced line then another 1/16" was removed to account for the glass thickness. The plans call for 2 degrees down thrust so that was cut off the fuselage sides. The new firewall was located by mounting the cowl...
  9. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Put two flights on the Champ today and the catch can is working perfectly, not a drop of oil on the landing gear strut.
  10. TonyHallo

    Scale BUSA Super Cub

    The new firewall will also act as the baffle between the high and low pressure zones inside the cowl. The shape of the cowl is quite a bit different than stock firewall. A dam was made out scrap wood, this was roughly fit using a contour gauge, packing tape was applied to the cowl for release...
  11. TonyHallo

    Scale BUSA Super Cub

    The firewall from the kit is three layers of 1/8" 3 ply plywood laminated together. I plan to use 1/4" plywood for the firewall. The 5/8" was laid out and cutting commenced. After trail fitting, decided to flush mount the firewall onto the 1/2" balsa sides rather than inset it into the...
  12. TonyHallo

    Scale BUSA Super Cub

    Got the bench cleared from the Champ repair and moved the Sub Cub fuselage onto the bench. First order of business clean off 14 years of dust. Next up determine if the Roto 85 with fit and what modifications are necessary. The plane was originally built using a 3W 56 CS engine, the exhaust...
  13. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    Indeed!
  14. TonyHallo

    Scale 112” - Taylorcraft by HeyLuc & Snoopy.

    More data to add. I have two cowls unfinished from Fibertech-n-More, the Cherokee cowl measures .021" thick in four places, the Chipmunk cowl measures .018" to .020" in four places. The unfinished cowl for the BUSA 33% Super Cub measures .030" to .034" thick, this was laid up by Steven at...
  15. TonyHallo

    Scale Pitts S1-T, S1-S, and a Challenger.

    I had seen him post over on FG a while ago.
  16. TonyHallo

    What beer ya drinking tonight?

    Had to drink this over the weekend. Recently moved the brewery about two miles north of me on the Allegheny River. Iron City Beer a Pittsburgh favorite, moved into an old PPG windshield factory in Creighton PA. I believe we make 400 cans per minute. Of course I had to clean the palette with...
  17. TonyHallo

    Scale 112” - Taylorcraft by HeyLuc & Snoopy.

    As recommended by others on the web that I consider knowledgeable I purchased this laminating epoxy and slow hardener. It wets out real nice and gives you plenty of working time. It is cheaper than West Systems as well.
  18. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Made it to the field this morning with the Champ. As you may recall I had a dead stick a year ago June after making a slight low speed needle adjustment. First task test run engine and adjust carb. Engine started after twenty flips or so on the choke. After warm up the engine had a slight...
  19. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Here are a few photos of the silver coat after sanding.
  20. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    The thing about the aluminum coat is that you can sand the blemishes out. The Poly Brush is like rubber when dry and impossible to sand while the silver Poly Spray sands nice. Once the silver is on you get to see what the final product will look like and made any corrections. I put a coat on...
Top