• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Xpress

    The 3DRCForums -Discuss Anything Thread-

    I'd have no problems covering it up with a cowl, because it's the performance I'm after :D
  2. Xpress

    The 3DRCForums -Discuss Anything Thread-

    Supa is the shiz man. Hooked me up on that DA70 and Falcon prop :thumbup:
  3. Xpress

    Suggestion Signature line?

    Most of us here have signatures already, maybe you just need to enable it? Now allowing us to upload a small picture would be cool :cool:
  4. Xpress

    The 'What did you do in your workshop tonight?' thread

    Sat this down on my desk and just stared at it
  5. Xpress

    A quick reminder

    This is what I gathered from the original post, that they want to keep traffic to some of the other forum-based websites down to a minimum, if not eliminate it entirely.
  6. Xpress

    The 3DRCForums -Discuss Anything Thread-

    It's so shiny.
  7. Xpress

    Xpress does a BANSHEE build...

    Time is definitely a factor here!! I do believe I have mostly everything I need to get her airborne, I just need to throw it all in the airplane and see if it flies :)
  8. Xpress

    Xpress does a BANSHEE build...

    Some notes for future builders: -The included RCGF 55CC plywood drilling template is an exact match to the DA70 mounting plate, so I will be using that to drill my mounting holes. -I needed a set of 1" standoffs for the engine, this should give me a solid 1/8" of clearance between the cowl and...
  9. Xpress

    Aerobeez "BANSHEE" 91" Slick build

    Well the engine runs on dinosaur molecules, but the ignition module uses electrons... I needed exactly 1" standoffs for this engine, so I ordered up a set of SWB 1" standoffs with bolts. I should have a good 1/8" of clearance between the cowl and spinner. Also, I found out that the included...
  10. Xpress

    Aerobeez "BANSHEE" 91" Slick build

    WOOHOO! Power has arrived!! Waiting on a shipment from ThunderPower and we'll have electrons to run it with. Will need to see what size standoffs I need and get those ordered up.
  11. Xpress

    Xpress does a BANSHEE build...

    We have power!!!
  12. Xpress

    Xpress does a BANSHEE build...

    Just waiting on equipment to show up! I have batteries, engine, and prop showing up today/tomorrow so we should be able to start moving forward pretty quickly.
  13. Xpress

    The 3DRCForums -Discuss Anything Thread-

    Woohooo new DA70 coming today!!! :banana::banana::banana::banana::banana::banana::banana::banana::banana::banana::banana::banana:
  14. Xpress

    The I'm going out flying thread 2016

    Haters gonna hate...
  15. Xpress

    The I'm going out flying thread 2016

    Little harrier rollin' like a mofo...
  16. Xpress

    Pilot RC 107" Extra 330SC

    We got it real bad earlier last week, it tore up a few rolls of our runway (Geotex 230), but mostly dead silent the past few days :cool:
  17. Xpress

    Pilot RC 107" Extra 330SC

    I run a Mej 29x10S on mine, it's a pretty quiet setup especially with the Pro Flow cans, power is still awesome. I may try a couple of Falcon propellers and I want to try stock mufflers too.
  18. Xpress

    Xpress does a BANSHEE build...

    I usually buy quality equipment to go along with the airplane so I can transfer it to a new airplane if the inevitable happens. Airframe doesn't cost much by comparison, it's usually the cheapest portion of it..
  19. Xpress

    Pilot RC 107" Extra 330SC

    So that leaves the question of the engine @Joe Hunt :oblong:
  20. Xpress

    Are you going to register with the FAA? Cast Your Vote!

    Only reason I registered was because i'll probably need it for work related purposes.
Top