• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    Decided to lay up the left pant using jointing tape rather than the overlap method. The 2 ounce and 4 ounce cloth was laid up and trimmed while green to the top of the parting line. The KELVAR was cut just below the parting line and laid up using peel ply, mounting hard points installed and...
  2. TonyHallo

    Yippee! What the postman brought

    Seen this on a "Ziroli Bearcat" build going on now. What a wonderful idea for setting the height of your laser level, lab Jacks. Now I use various blocks shimmed with balsa and plywood to set the height. When I reached out to thank the builder for the idea he said that he borrowed that from...
  3. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    Maybe start covering the wing and the tail parts to get the hang of it, then you can judge how to work around the cabin area. Around the door, you will need to attach the fabric, shrink it, coat of Poly Brush, then a finish tape attached with Poly Brush. My thoughts what ever can be removed...
  4. TonyHallo

    Mini lathe (and mill) discussion.

    I was wondering how you would use the dial indicator, I see now. I've used to old fashion method, smashing solder with the piston and measuring the resulting thickness.
  5. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    If the side pieces were removed it would make covering around the door opening much easier. I find attaching the fabric a little messy so what I look for is nothing of value in vicinity. Plus, you've done all the wonderful work, it would be shame to get overspray all over it.
  6. TonyHallo

    Mini lathe (and mill) discussion.

    To measure the narrow squish band around the head?
  7. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    Do you plan to leave the interior in while covering and painting? Just wondering.
  8. TonyHallo

    Scale 112” - Taylorcraft by HeyLuc & Snoopy.

    Merlyn Graves?
  9. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    Got it.
  10. TonyHallo

    Scale 112” - Taylorcraft by HeyLuc & Snoopy.

    Why not just use the mold and make a new cowl? I've done the lost foam method, clean out is a pain. I used foam to make the wing tips plugs for the Cherokee, cheaper than balsa!
  11. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    Does Tonyjet have a web page?
  12. TonyHallo

    Scale 112” - Taylorcraft by HeyLuc & Snoopy.

    I just weighted the cowl for the 30% Chipmunk, it is a large cowl 12 1/2" wide and 18" long, it is just over 16 ounces. Based on thickness I would say it is about 12 ounces per yard of cloth. That's one nice job there Snoop.
  13. TonyHallo

    Scale 112” - Taylorcraft by HeyLuc & Snoopy.

    That's looking good.
  14. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    I would go crazy cutting all the tapes, I just used a 25 yard roll of 3/4" on the right wing. I find almost impossible to cut a straight line, cut a few short pieces of bias tape for rudder leading edge but that's it. Didn't know they made 2mm pinking shears, just recently found 3 mm thanks to...
  15. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    The 2" perimeter tape is installed one piece from the root to the outer end of the aileron . The top reference line was laid out 1" above the centerline of the leading edge. The tape was cemented to the top side only along the leading edge, then cemented to the wing tip at the centerline. The...
  16. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    The tapes are done on except for the 2" perimeter tape in theses photos. The two wide scale tape was just recently offered by F&M, all the previous builds were done with 1" wide tape. I'm kind of excited about laying down the 2" tape. Yesterday I discovered the front tongue that slides into...
  17. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Yes, I got the rings are from IFlyTallies. The rings are laser cut material, reminds me of gasket sheet material. You could 3D print rings if you are in to that. I still have a few left or I would be looking at buying a printer. I tried to buy rings from Balsa USA but they never responded...
  18. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    The fabric arrived today, put the top fabric on and shrunk all the fabric to 250 degrees. Then started on the inspection rings. I really do like the way the rings look when covered with the doily. Four are done, nine more to go, it takes 15 minutes or so to get the doily ironed down around...
  19. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    That's right, let's busy, you will be flying before you know it.
  20. TonyHallo

    Scale 112” - Taylorcraft by HeyLuc & Snoopy.

    My comment was to the development of the cowl. The top half is a separate development from the bottom half.
Top