• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. TonyHallo

    Yippee! What the postman brought

    Here are a few documents that will help you understand how it works.
  2. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    Taking a plane to auction on Saturday that had a little mishap during landing, hit an area on the runway that the skunks were working on, the left wheel hit the rolled up grass and flipped the plane over breaking the canopy. I'm not interested in repairing the plane because I'd rather work on...
  3. TonyHallo

    110" TIMBER Assembly Thread

    "But I've been in the wrong place But it must have been the right time"
  4. TonyHallo

    Yippee! What the postman brought

    Have you used Open/EdgeTx before Nick? Twelve or thirteen and still learning for me.
  5. TonyHallo

    Yippee! What the postman brought

    Drillsandcutters.com I get end mills and drill bits from them. Funny thing, I bought these from one of their emailings but can't seem to find then on their site.
  6. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    A little control linkage work, used 1/16" G10 for the horns.
  7. TonyHallo

    Yippee! What the postman brought

    Drills and Cutters.com had a sale on short stub drills. I stocked up on the tap and drill size bits for 4-40 through 8-32, some sizes were out of stock, some were low. Most were under $.50 each
  8. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    Yest that is it, zoomin on the second photo I sent and you can see that the fairing is not flat but humps up. The balsa under the windshield is not there on the full scale, only on the outside. Here's another view.
  9. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    The curved things under the windshield, look at the photo, see the fairing butt against the windshield, not under it. Zoom in on this photo.
  10. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    Thank you Snoopy. Bungeed the Cherokee carrier to a step ladder and then bungeed the fuselage onto the carrier to hold the fuselage vertical while the position of the engine was adjusted. Didn't source the spinner yet so a 3 1/2" plywood disc was use to align the engine. Once happy, the...
  11. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    Working on the servo pockets and hatches. The wing is rather thick so decided to mount the servos upright, or downright since they on the bottom of the wing. Pinned a fence to the wing made from scrap balsa. Using the router attachment cut .025" deep groove around the servo pocket, short...
  12. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    I suspect some of the problem is the fairing should be on the outside rather the the inside.
  13. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    With frise type hinges on the flaps, the upper wing surface needs extended because the flap leading edge pulls away from the wing trailing edge as the flaps are deployed. Thought about how I would do this and decided to use .025" thick G10 that was on hand. Used double sided carpet tape to...
  14. TonyHallo

    The 'What did you do in your workshop tonight?' thread

    20 years ago I bought a ZDZ 80 RV, pipe, and JMB can at the Toledo show from RC Showcase, I was instructed not to cut the pipe as it was quarter wave tuned, I followed the recommendation and built the can into the plane. The package was very effective. Sold the plane at auction this past fall...
  15. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    Tonight was the monthly meeting for the Indiana Flyers Club. One of our members hosts the meeting every month at his under used shop, beautiful work place. He sets a table up for me every month for show and tell. Took the Cherokee and a set of scales, came in at 18 pounds as you see it, minus...
  16. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    It's been a while (2004) since I have cut foam core wings, most of my builds use foam rib wings, I forgot how nice it is to have the shucks to hold thing place. The right wing hinging came out great. Hope this left does as well.
  17. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    Have the wing side of the flap hinges completed. Drilled the pivot holes with a a #23 drill and pressed 5/32 od K&S brass tube in, the tubes are cut and sanded flush to the G10 material. Made a fixture to locate and hold the G10 while the Gorilla glue foams and cures. Need to make a seperate...
  18. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    After calculating the required length for the engine standoffs to provide 2 down and 2 right thrust I determined that I had no aluminum stock to make them! Ordered 3' length of 3/4" and 7/8" from McMaster Carr, should be here today. Moved on to hinging the wings. The ailerons are hinged on...
  19. TonyHallo

    70cc FLEX Ultimate assembly thread.

    Was wondering about the location as well, you have the ignition module blanketed with foam, recently read somewhere that mounting the module upside down is the best since the bottom runs hotter. Made sense as heat is not electronics best friend.
  20. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    Heading to Fla next month for a few days, painting season is not far off, would really like to paint this bird this year. Missed a great flying day today, 74f in the burg, winds light and variable.
Top