Viton clunk line

[49dimes]

LoL...No.......Just what ever is left after the last time it flew. Typically about a 1/3 tank (18oz tank)

 

[jhelber08]

Must be something to do with cheeseburgers.

 

[Robotech]

I have also found that the "cheap, Chinese" fuel line keeps it's elasticity much longer than the genuine Tygon fuel tubing. I still only use Viton for the clunk line, but everything else is the Chinese stuff.

 

[Robbins]

I have also found that the "cheap, Chinese" fuel line keeps it's elasticity much longer than the genuine Tygon fuel tubing. I still only use Viton for the clunk line, but everything else is the Chinese stuff.

i am the exact opposite.
weird, but i feel great with the genuine tygon.
i also like taildragger's blue line stuff whatever that is.

 

[Robotech]

i am the exact opposite.
weird, but i feel great with the genuine tygon.
i also like taildragger's blue line stuff whatever that is.

The blue line from Taildragger is the Chinese line I mentioned.

Tygon is fine but it stiffens much quicker than the Chinese stuff.

 

[yakpilot]

The blue stuff is working great. Once it is on you pretty much have to cut it off so it's not good for fuel dot use.

 

[Bunky.F.Knuckle]

The blue stuff is working great. Once it is on you pretty much have to cut it off so it's not good for fuel dot use.

I use it on fuel dots. Tighter than Chelsea Clinton on prom nite. But, I also do use some heat, to get it to form to what I'm sticking it on.

 

[orthobird]

keep an eye on that blue stuff! i had it one tank, and the following season, the tube "swole" and was pushed into one corner of the tank!! it grew in length by about 1 inch or so. I cannot make any comments on the Clintons on this.

 

[orthobird]

found it!!!!

 

[yakken]

found it!!!!

View attachment 13196

Did your tank get excited or sumthin[emoji1]