O
Ohio AV8TOR
Please share with us pictures of your cowl exit air exhausts. We all hear that we need 2-3x the outlet as inlet which is tough to do sometimes.
I am finishing up my 83" MXS and while there is a raised tunnel outlet for air it is barely 1x. So I need to cut something else. When cutting an opening in the cannister tunnel is it best to do toward the front by the landing gear just aft of the cowl so that raised tunnel will help with sucking the air out, or at the rear of the canister tunnel? Below pics is what I have so far. Thanks for your help.
2188=1149-photo 1.jpg
2188=1148-photo 2.jpg
I am finishing up my 83" MXS and while there is a raised tunnel outlet for air it is barely 1x. So I need to cut something else. When cutting an opening in the cannister tunnel is it best to do toward the front by the landing gear just aft of the cowl so that raised tunnel will help with sucking the air out, or at the rear of the canister tunnel? Below pics is what I have so far. Thanks for your help.
2188=1149-photo 1.jpg
![2188=1149-photo 1.jpg](http://giantscalenews.com/oldwpattachments/attachments/2188=1149-photo 1.jpg)
![2188=1148-photo 2.jpg](http://giantscalenews.com/oldwpattachments/attachments/2188=1148-photo 2.jpg)