• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

DA diaphragm vent questions and methids

Jedijody

50cc
This is what I do, then I run the tubing into my muffler, works like a charm.
 

Attachments

  • IMG_1590.JPG
    IMG_1590.JPG
    63.9 KB · Views: 287

IMAC FANATIC

40% happier than most folks.
I run mine onto the motor box and just lightly zip tie it there. Easy-peasy!

Went with this for vent/diaphragm from carb. And added a heat shield for both lines. I like it !
In motor box used a aluminum tube 1/2" long by 3/16" and grommet with a tie on it to keep the line from deforming.
 

Attachments

  • 20141205_232157.jpg
    20141205_232157.jpg
    81.9 KB · Views: 275
  • 20141205_232145.jpg
    20141205_232145.jpg
    76.9 KB · Views: 262

49dimes

Damn I'm hungry
Went with this for vent/diaphragm from carb. And added a heat shield for both lines. I like it !
In motor box used a aluminum tube 1/2" long by 3/16" and grommet with a tie on it to keep the line from deforming.

That Works!

I was also wondering where to get that thermal wrap?? I know about the braided wire pipe socks but that wrap + sock will keep heat and mess to a minimum.
 

IMAC FANATIC

40% happier than most folks.
Both of those items were from the JEGS hot rod catalog. Forgot what brand I threw away the packages, sorry.
Saw the same stuff at kragen for half price though.the wrap.. Not the sock that is.
 
Top