Brand New PAU........Viper-ST Announced!!!!!!!!

[Bemeson]

I guess I am going to be one of the fatboys then.

Brian

 

[Bemeson]

@Terryscustom
Could you post these dimensions:
Tip of spinner to end to tail and without spinner....
ground to top of rudder

I need to make sure this beast will fit in the truck.

I have the perfect servos for this plane if the planes get here in time.

Thanks
Brian

 

[Terryscustom]

@Terryscustom
Could you post these dimensions:
Tip of spinner to end to tail and without spinner....
ground to top of rudder
I need to make sure this beast will fit in the truck.
I have the perfect servos for this plane if the planes get here in time.
Thanks
Brian

Specs:
104" Wingspan / 105" with SFG's
99.5" long with spinner +/-
2185 sq. in.
100 / 120cc engine recommended
Split Ailerons!

 

[Buck Tracker]

Maybe this was posted back a ways but what did the proto type's come out at for AUW?

 

[Terryscustom]

Maybe this was posted back a ways but what did the proto type's come out at for AUW?

No problem, here is what I posted after assembly was finished:

Drum roll please.......all up final weight (with my setup) came out at 25lb. 8oz. less batteries. Adding batteries brings it to 26lb. 2oz..

Anyone who has flown a 25-27lb. plane with 120cc's on the nose will understand that this is going to be just plain stupid fun power!!!!

 

[Buck Tracker]

Thanks!

 

[Terryscustom]

Had time to get Colton's flight vid loaded up. They were switching between transmitters and it was out of trim at the beginning so I cut that part out.

Very nice flight and stress test Colton

 

[49dimes]

UH drool UH

 

[Lojik]

Beautiful aircraft, would love to get my hands on one, maybe its time to start saving for my first 100cc

 

[Bemeson]

Specs:
104" Wingspan / 105" with SFG's
99.5" long with spinner +/-
2185 sq. in.
100 / 120cc engine recommended
Split Ailerons!

I got four inches to spare....bring it on.

Brian