Discussion 100cc setup

[gyro]

That sounds like a nice unit how does it compare to the smart-fly stuff?Also what kind of batts are you running and how many flights are you getting.
forgive all the questions but this is my first 100cc plane and I want to get the right stuff to try to avoid mechanical failures.

It compares favorable IMHO. I've had both, and I honestly like the sturdy and rigid case of the RCCSKJ better. Add in the display, and you're set for half the price. The built in OPTO kill isn't as convenient to use, however I prefer the tech aero anyway, so that's what I use.
With 7 brushless servos, I could get 6 flights on 2x 2600 LiPo or LiIon.

 

[Lojik]

another option to consider is also the boomarc power bus units: http://www.boomarc.com/en/ar-power-buss-distribution-systems

But I agree with GYRO for 80cc+ I would use a power distribution system of some sort

 

[Madinpensacola]

%#Futaba BLS172HV= WOW! $250 a pop. Insane! 7x$250=$1750

If you are a member of their super saver club there is a nice discount and free shipping with Tower Hobbies. I recently ordered 8x BLS172 Futaba servos from them. They list for $219.99 each and I got them for right at $174 a piece DELIVERED. Well worth the money for serial bus and 514 in. ozs. of brushless torque. They ROCK.

 

[gyro]

If you are a member of their super saver club there is a nice discount and free shipping with Tower Hobbies. I recently ordered 8x BLS172 Futaba servos from them. They list for $219.99 each and I got them for right at $174 a piece DELIVERED. Well worth the money for serial bus and 514 in. ozs. of brushless torque. They ROCK.

Welcome to the forum!

 

[Madinpensacola]

Welcome to the forum!

Thanks Gyro. Least I can do. If you had given me an airplane RTF then I'd of joined sooner. LOL If your visit to our field is still fresh in your mind then you'll appreciate my avatar. :facepalm:

 

[3dmike]

I'm not so good that I need the fastest or highest torque so while I don't skimp on quality I do on speed and torque a bit because frankly I don't need it.

Here is my setup on my Pilot 35% Extra 260

Motor: DLE-111v3
Servos:
Throttle: Savox SV-0220MG
Ailerons: Savox SC-1268SG x 4
Rudder: Savox SB-2230SG x 1
Elevators: Futaba S9157 x 2 (I would have gone with Savox all around but I already had these)
Power Dist: Smart Fly EQ6
RX Power: 2 Fromeco Relion 2600's
Ignition Battery: DinogyLipo

Savox SC-1268SG High Torque Steel Gear Digital Servo (High Voltage)-savsc1268sg

List Price $109.99 Map Price $92.99

Dimensions(mm): 40.3x20.2x37.2 Weight(g): 62.0 Speed(@4.8V sec/60): .15 Torque(@4.8V oz-in): 160.0 Speed(@6.0V sec/60): .13 Torque(@6.0V oz-in): 208.3 Speed(@7.4V sec/60): .11 Torque(@7.4V oz-in): 347.2 Gear: Unique Steel Bearing: 2BB Case: Aluminum 25 Tooth Spline Savox SB-2230SG High Voltage Monster Torque Brushless Tall Steel Gear Digital Servo-savsb2230sg List Price $159.99 Map Price $134.99 Dimensions(mm): 40.3x20.2x45.0 Weight(g): 84.0 Speed(@6.0V sec/60): .16 Torque(@6.0V oz-in): 499.9 Speed(@7.4V sec/60): .13 Torque(@7.4V oz-in): 583.3 Gear: Unique Steel Bearing: 2BB Case: Full Aluminum 25 Tooth Spline Frequency: 250-333 Pulse Rate Frequency: 1520

This is the Futaba S9157 High Torque Servo.
Price 199.99
Sale Price: $139.99
FEATURES
Ideal for large competition airplanes
Coreless motor
Dual ball bearings and metal gears
Metal middle case helps dissipate heat for cooler operation
One year limited warranty


SPECIFICATIONS
Torque: 425oz-in (30.6kg/cm) @ 6V
Speed: 0.14 @ 6V
Size: 1.6 x 0.8 x 1.5" (41 x 21 x 37mm)
Weight 2.5oz (71g)
Horn Screw Size: 3x8mm

 

[3dmike]

By the way.... The setup above rocks for me and my skill level. I absolutely love the Smart-Fly EQ6 and the Savox servos!

 

[3dRCparts.com]

nice set-up, only issue I see is the 9157 are not HV, while the others are?

 

[3dmike]

Yup... I am currently running 6v out of the Smart-Fly powerboard. When I change the elevator servos out I will be at 7.4 all around.

Some guys do run these at 7.4 but I would rather not chance it.