• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. wedoitall

    60" Laser-EXP

    I know I can get 90 :D
  2. wedoitall

    60" Laser-EXP

    speaking of arms. Im using 7245's with the long dubros on the elevator. The max I can get on deflection is around 75 degrees. I setup the hinge gap to get 90. By looking at the elevator arm when deflected I know I can get more throw out of the servo itself. Looks like I need a longer arm?
  3. wedoitall

    60" Laser-EXP

    is that only on high rates WOT? Hey Jacob, do you seal all of your hinges? I did on the MXS but ended up take'n them off the ailerons.
  4. wedoitall

    60" Laser-EXP

    are those the same ones that Cody is using?
  5. wedoitall

    60" Laser-EXP

    Im not quite finished. Need to put something on the turtledeck. Im opened to suggestions. Right now im leaning towards something with the words "Hillbilly Hucker" Im sure somebody has said that before, but I just coined it so if you use it your be infringe'n upon copyright laws. :p The...
  6. wedoitall

    60" Laser-EXP

    yea after all the problems ive heard lately, would be really hard to fly a spectrum servo. I guess that's the way a lot of Futaba guys felt a few years back over Tx and Rx's Oh yea I finished my Laser. Have been applying the last of the graphics and waiting for a few more to show up in the...
  7. wedoitall

    60" Laser-EXP

    What a pal.
  8. wedoitall

    60" Laser-EXP

    WOW! your one fast builder.
  9. wedoitall

    3DHS --FLY LOW-- Always OFF TOPIC

    Lucky dog :)
  10. wedoitall

    Extreme Flight 60" Laser Build Thread

    that looks rad man.
  11. wedoitall

    60" Laser-EXP

    do you have your ailerons sealed? I didn't like them sealed on my MXS but I still had them on the rudder and elevator
  12. wedoitall

    Dmss?

    even when i ran the 52's i had a CC bec installed.
  13. wedoitall

    78'' Extra

    lucky dog
  14. wedoitall

    Dmss?

    Patrick, have you checked your servo setups for binding? You can buy a meter to look at your amp draw or if you have a wattmeter you can solder you up some servo extensions to hook into your wattmeter and see what your pulling at idle and at full throw. also if you do this move all surfaces...
  15. wedoitall

    What's on your bench?

    48 an 60 MXS 60 Laser 51 Slick 46 yak some big junky foamy that belongs to my buddy. yea im trying to work on all of them at the same time. may get a hr or 3 sleep tonight and hopefully more tomorrow night
  16. wedoitall

    60" Laser-EXP

    i was thinking the 2nd on that arm for the rudder. IIRC i was getting right under 45 degrees on the lasers rudder. ill measure it again.
  17. wedoitall

    60" Laser-EXP

    i see in the mxs man-u-well, it says long for the rudder also. but im pretty sure im not gonna get as much throw on the laser for the rudder. i may be wrong tho. it occasionally happens. :D
  18. wedoitall

    60" Laser-EXP

    yea. I guess I should look at my MXS manual again I think it has it in there. you use the longest one for the rudder? if so what hole did you use? was thinking the longest arm on the longest hole would actually be too much for the rudder
  19. wedoitall

    60" Extra 300 EXP

    hey man that eye is not as lazy as it was before. its been exercising. :D
  20. wedoitall

    60" Laser-EXP

    one more noobular question. on the dubro arms for the 7245 I use the 2nd longest arm right
Top