• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Recent content by PowerSlave

  1. PowerSlave

    104" AJ Slick Building, Flying, and Questions

    I posted this on RCGroups also.... Just thought I would share some information on my rudder servo. I went with a single BLS157HV for the rudder and after 20 flights I can say with confidence that I'm getting blow back with one servo. I was really trying to get away just having one but no luck...
  2. PowerSlave

    Bowling Green Extreme 3D Fly-In, July 25-28, 2013

    You going to have a few TDRC 120cc 35% PITTS & TDRC 50cc-60cc Pitts ARF for sale at the fly in? Been looking at them also. Really like the new Orange Scheme alot.
  3. PowerSlave

    Bowling Green Extreme 3D Fly-In, July 25-28, 2013

    I hope Extreme Flight brings some 91" Extras to sell here. Should be a good time.
  4. PowerSlave

    3DHS Planes Picture Thread

    Can't wait to fly again this Saturday.
  5. PowerSlave

    Bls 157

    I put more tension on the cables and it stop the real bad jitters but it still did it some. I didn't notice anything in the air on the maiden flight but I also had a good 12 mph cross wind so was hard to tell. I'm just going to keep on flying it the way it is and if something starts to act up...
  6. PowerSlave

    3dhs 103" Extra 330SC

    Nice.
  7. PowerSlave

    3dhs 103" Extra 330SC

    Nice job John glad to see everything went smooth.. I got my 104 done last weekend... Going to fire it up this Saturday for the first time. Need to get together soon and fly the big boys.
  8. PowerSlave

    Bls 157

    Thanks for the help everyone. I will tighten them up more then.
  9. PowerSlave

    Bls 157

    I will try and swap servos but the rest of my 104 has Savox 2270. I only bought one BLS 157 for the rudder only. The pull pull cables are snug but not tight. Is it better to run some kind of rudder servo tray? I'll play around with it some and if nothing works I guess I will get another one...
  10. PowerSlave

    Bls 157

    I am running single BLS 157 on the rudder of my 104 Slick pull pull set up. It's all new never flown yet and on the ground the servo has the jitters very bad... really bad. I'm using a spektrum 12 ch power safe reciver putting 7.4v to all the servos. Any ideas on why this high $$$ servo has...
See more
Top