Flyingjon
70cc twin V2
I'm parting out my AW Freestyle 260.
I've flown this plane for two years and have loved the way it flies. It had a couple of dead stick landings on the first motor (dle35) that ripped the gear out so the landing gear plate got totally replaced and beefed up. If it breaks again the fuse will snap! It's the plane I really learned the basics of 3D on and it's been flown hard. There are several patches on the covering. It had a DLE 35 when I first set it up but now has a VV 40cc twin. I've had a new cowl on back order for 8 months and they still don't have them in so the cowl has multiple cutouts. It still flies great and has ballistic performance, but I moved up to bigger setup.
1. Airframe as described above. Lpu preferred, but might consider shipping. $250
2. SOLD VV 40cc twin 1/4-32 plug. This is an awesome motor. It has around 4 gallons through it and I installed BOWMAN RINGS when new. It has a set of Jtec mufflers that are a bit quieter and sound much better than stock. They were $145 alone. Comes with carbon spinner and a xoar 20x8 prop. $385 shipped.
3. Five Hitec 7954sh servos with SWB arms. These only have 6 flights on them. I upgraded from 5585's so these are practically new. $400 shipped.
4. Fromeco badger switch JR in and out. Pulse 2s 2550 Mah lipo rx pack. Has probably 30-40 flights on it. $35 shipped
5. SOLD Tech-aero IBEC. $35 shipped
6. SOLD Four Hitec 5585 servos. These are what it had for most of its life. No arms, just the servos. They are all in working order. $80 shipped
I've flown this plane for two years and have loved the way it flies. It had a couple of dead stick landings on the first motor (dle35) that ripped the gear out so the landing gear plate got totally replaced and beefed up. If it breaks again the fuse will snap! It's the plane I really learned the basics of 3D on and it's been flown hard. There are several patches on the covering. It had a DLE 35 when I first set it up but now has a VV 40cc twin. I've had a new cowl on back order for 8 months and they still don't have them in so the cowl has multiple cutouts. It still flies great and has ballistic performance, but I moved up to bigger setup.
1. Airframe as described above. Lpu preferred, but might consider shipping. $250
2. SOLD VV 40cc twin 1/4-32 plug. This is an awesome motor. It has around 4 gallons through it and I installed BOWMAN RINGS when new. It has a set of Jtec mufflers that are a bit quieter and sound much better than stock. They were $145 alone. Comes with carbon spinner and a xoar 20x8 prop. $385 shipped.
3. Five Hitec 7954sh servos with SWB arms. These only have 6 flights on them. I upgraded from 5585's so these are practically new. $400 shipped.
4. Fromeco badger switch JR in and out. Pulse 2s 2550 Mah lipo rx pack. Has probably 30-40 flights on it. $35 shipped
5. SOLD Tech-aero IBEC. $35 shipped
6. SOLD Four Hitec 5585 servos. These are what it had for most of its life. No arms, just the servos. They are all in working order. $80 shipped
Last edited:
