• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

TonyHallo

640cc Uber Pimp
The local autobody supply that I normally go to could not decipher the Imron paint code, when a little farther away to a store that sells DuPont products, identified the red code and had them mix a quart of acrylic enamel paint.
Still working on the ailerons and flaps, the corrugations are getting to be a pain!


IMG_4046.jpg
 

TonyHallo

640cc Uber Pimp
Found these sanding sticks on Amazon. These work very well sanding the ends of the corrugations. Was trying to sand with my finger but that didn't work very well! The sticks have a flat side and a round side, nice for getting into tight places.
IMG_4056.jpg
IMG_4060.jpg
IMG_4062.jpg
 

Snoopy1

640cc Uber Pimp
No progress on the Cherokee, still finishing up the mods to the Champ. Purchased this 40cc starter kit for an Ephil 40 cc engine that I hope to marry to the Saito 61 TS. Future project, decided over the weekend that I'm getting too to flip these engines.View attachment 123899

Interesting hope you give us all the details on the starter up grade. I believe that the Kolm makes a starter kit for the engine I have as you hand cranking that engine it is not going to be easy if it does not start on first few flips.
 

TonyHallo

640cc Uber Pimp
Interesting hope you give us all the details on the starter up grade. I believe that the Kolm makes a starter kit for the engine I have as you hand cranking that engine it is not going to be easy if it does not start on first few flips.
Oh you know I will!
It getting the fuel into the carb that takes the time and effort. I think an electric fuel pump would help as well.
 
Top