The 3DRCForums -Discuss Anything Thread-

[AKfreak]

No problem, I love to do 3D meshes and animate them. What logo do you want done? The KEG logo? You have Adobe Illustrator, I need you to open your logo in AI and run the Make outlines command, then export that logo in Illustrator 8 (it's an option presented in the export dialog for older version capability). Then email that AI file. This way I will have all of the vector based paths to construct a clean 3D mesh with Zero artifacts. It's a pain, but it save me having to draw your logo by hand.

 

[AKfreak]

Guys I am drawing a blank on this math problem. Can you not laugh and lend me a hand real quick.

I have two bottles (a Fiji 16oz, and a Different one I like the shape better of). If the Fiji bottle is 6.9375 inches, and requires a brass tube with the overall length of 4.375 inches. And mt new bottle is 8.125 inches, what is the overall length of the brass tube supposed to be if it was exactly the same ratio?

So
6.9375 / 4.4375 = 1.56
8.125 / ????? =1.56 ?=5.208

Am I doing that right?

Fiji bottle = 6.9375 it's Brass Rod = 4.4375
New Bottle 8.125 its Brass Rod = 5.208?

I feel so dumb right now, can you please work this problem and tell me what you come up with. AKf

 

[alawson999]

Easiest for me to flip the ratios

4.4375/6.9375 = x/8.125

Refractor

4.4375*8.125/6.9375= x

X= 5.1971 ( rounded the last digit)

Someone should check me before you cut anything

 

[jmart95]

Guys I am drawing a blank on this math problem. Can you not laugh and lend me a hand real quick.

I have two bottles (a Fiji 16oz, and a Different one I like the shape better of). If the Fiji bottle is 6.9375 inches, and requires a brass tube with the overall length of 4.375 inches. And mt new bottle is 8.125 inches, what is the overall length of the brass tube supposed to be if it was exactly the same ratio?

So
6.9375 / 4.4375 = 1.56
8.125 / ????? =1.56 ?=5.208

Am I doing that right?

Fiji bottle = 6.9375 it's Brass Rod = 4.4375
New Bottle 8.125 its Brass Rod = 5.208?

I feel so dumb right now, can you please work this problem and tell me what you come up with. AKf

4.4375 is 63.96396396396396% of 6.9375
so with that ratio, 63.96396396396396% of 8.125 = 5.197072072072072 according to an online calculator, I'm to lazy to give a real go at it

 

[jmart95]

Easiest for me to flip the ratios

4.4375/6.9375 = x/8.125

Refractor

4.4375*8.125/6.9375= x

X= 5.1971 ( rounded the last digit)

Someone should check me before you cut anything

I got the same, so I think you got it

 

[AKfreak]

yes..... thanks fellas

 

[Decal Dennis]

No problem, I love to do 3D meshes and animate them. What logo do you want done? The KEG logo? You have Adobe Illustrator, I need you to open your logo in AI and run the Make outlines command, then export that logo in Illustrator 8 (it's an option presented in the export dialog for older version capability). Then email that AI file. This way I will have all of the vector based paths to construct a clean 3D mesh with Zero artifacts. It's a pain, but it save me having to draw your logo by hand.

Yep...the KEG logo.

Coooool...I'll have to import my logo into AI. I'm having trouble getting my logo into 3D format, I don't know if it's because it's complicated or what.

 

[AKfreak]

Well, soon we will find out whats up. I know I can extrude it and make it raised with square edge. The Bevels, Scallop, Coves, ect edges may be more of a challenge. However I have a few tricks up my sleeve to deal with hard cases.

 

[aronph]

Somebody needs to sell me a 103....

 

[AKfreak]

I bet I can get you one for 5 to 6 grand, rtf.