Welcome To GiantScaleNews.com

GSN is the BEST in an RC online community. Less corporate BS and more down home fun. Better conversations with REAL RC'ers. Don't settle for the biggest when you can have the best!
  1. If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!


IMAC Scratch build Laser 200

Discussion in 'Giant / Scale Scratch and Kit Build Threads' started by Forgues-Research, Jun 27, 2019.

  1. Forgues-Research

    Forgues-Research 150cc

    I am starting a new build of a Laser 200 which will have a wingspan of 100 inches, and a total lenght of 98 inches, which is a bit different then the last one I build a few years ago, also the plans I am using are totally different , which means the landing gear will also be more solid ,

    The wings will be jig build which is my favorite way of building wings, and the turtle deck will be done the same way which I have never done this way,

    The fuselage will be done pretty well straight forward but also different then the last one I did.

    Some of the Technics will incorporate a bit of 3D printing for some bulk heads, (tested already)

    I'm leaning towards electric power with 12S Lipos, flight controller will be Booma AR Smoothe flite.
    Servos will be Bluebird 43A . Radio is FrSky X10S with my own design casing for more ergonomic comfort,
    Finally, please be patient at first as it will be slow at first since it is my winter project but starting now anyway,

    As always , any comments are always welcome, keeps me out of trouble lol
  2. WMcNabb

    WMcNabb 150cc

    TN, USA
    Looking forward to this one!!
    Forgues-Research likes this.
  3. [​IMG]
    Forgues-Research likes this.
  4. BalsaDust

    BalsaDust Moderator

    Watching with great anticipation.
    Forgues-Research likes this.
  5. Bartman

    Bartman Defender of the Noob!

    Any chance we can convince you to have a go at building Leo's Shark version of the Laser???

    Forgues-Research likes this.

  6. Snoopy1

    Snoopy1 640cc Uber Pimp

    Thanks for doing this will be glad to follow the build
    Forgues-Research likes this.
  7. Alky6

    Alky6 150cc

    Forgues-Research likes this.
  8. 49dimes

    49dimes Damn I'm hungry

    :fist_pump:. IBWU:)
    Forgues-Research likes this.
  9. Forgues-Research

    Forgues-Research 150cc

    certainly interesting but not being a fan of any 3D stuff, I will pass, but thanks for the confidence in me to be able to do this
  10. Bartman

    Bartman Defender of the Noob!

    49dimes, Forgues-Research and AKNick like this.

Share This Page