Welcome To GiantScaleNews.com

GSN is the BEST in an RC online community. Less corporate BS and more down home fun. Better conversations with REAL RC'ers. Don't settle for the biggest when you can have the best!
  1. If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

How to drill a gas prop.

Discussion in 'Gas Engines' started by Richo, Jun 1, 2016.

   
  1. Richo

    Richo New to GSN!

    4
    15
    3
    If you want to drill your own props and you are a little unsure, this video may make the task a little easier.

     
  2. Jetpainter

    Jetpainter 640cc Uber Pimp

    I always enjoy your videos Richo.:way_to_go:
     
    Richo likes this.
  3. Thank you for taking the time to make the video. Great job!
     
    Richo likes this.
  4. jamesrxx951

    jamesrxx951 100cc

    536
    259
    63
    I did not watch the whole video but I recommend using a framing square to make sure the table is exactly 90° to the drill bit. Makes a big difference with installing the screws.
     
    Jetpainter likes this.
  5. And dont plunge the bit into the prop, and expect it to be straight. It will walk faster than Mark Zupan.
     
    thurmma likes this.

Loading...

Share This Page