Welcome To GiantScaleNews.com

GSN is the BEST in an RC online community. Less corporate BS and more down home fun. Better conversations with REAL RC'ers. Don't settle for the biggest when you can have the best!
  1. If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

GSN GIVE-A-WAY Hangar 9 35% Extra 300X Assembly

Discussion in 'Giant / Scale ARF Build Threads' started by Jetpainter, Nov 9, 2016.

   
  1. Jetpainter

    Jetpainter 640cc Uber Pimp

    I'm sure they'll get tested now and then. ;) And by the way I took you advice on where to get them. I tried calling several times, without any luck, so I ended up going through the website. I think they should be here tomorrow.:)
     
    stangflyer and Snoopy1 like this.
  2. Jetpainter

    Jetpainter 640cc Uber Pimp

    I would love to see that! The pucker factor might be high, but probably worth it.
     
    pawnshopmike and Snoopy1 like this.
  3. Jetpainter

    Jetpainter 640cc Uber Pimp

    The Ryan @pawnshopmike is talking about is Ryan Mowery. Ryan is an awesome pilot. Here is a little video I took last year of him torture testing a new prototype RedWing 120cc Slick. I didn't get the first part of the flight when he was running up and down the runway doing rollers inches from the ground. Every time I watch him I feel like I should take my crap home, pour my leftover gas on it and light it on fire. ;) I really felt like that the day he was doing rolling harrier circles in front of himself and changing the direction of the roll every 1/4 way around. :face-palm:

     
    stangflyer and pawnshopmike like this.
  4. Snoopy1

    Snoopy1 150cc

    1,801
    2,031
    113
    Canada
    Have to agree with you, those guys are painful to watch. After they have flown you might as well sit on the back of your for day and drink beer. It was the same for me watching Jessie at JoeNall, he just never made a mistake
     
    stangflyer likes this.
  5. I'm just glad he's on my team. :yesss:
     
    Jetpainter likes this.
  6. stangflyer

    stangflyer I like 'em "BIG"!

    Not doubt! Ya think you're getting pretty good and actually you're quite pleased with the new things you've mastered. Oh yeah...ya can't wait to impress all your buds with your new moves, right? Then some jerk, (affectionately said) shows ya his stuff. I just feel so unworthy next to complete awesomeness. Lol. praising-the-lord-smiley-emoticon.gif
     
    Snoopy1 and pawnshopmike like this.
  7. Jetpainter

    Jetpainter 640cc Uber Pimp

    That hits the nail on the head right there. It makes it even worse when the "Jerk" is a nice guy, you can't even hate him.:lol2:
     
    pawnshopmike, Snoopy1 and stangflyer like this.
  8. Jetpainter

    Jetpainter 640cc Uber Pimp

    The servos arrived today. The list of parts I still need is getting a little smaller.
    20170220_193820.jpg
     
  9. stangflyer

    stangflyer I like 'em "BIG"!

    Ok, I see servos and an airframe with a receiver installed. Why isn't it done yet? That list of needed items couldn't be too large now? What is the hold up...come on. Get with it.
    impatient-smiley-emoticon.gif hearty-laugh.gif
     
    Luchnia and pawnshopmike like this.
  10. I have all the control Surfaces finished. I put a plate over the canister section, I mounted the tank and batts on it... putting it in front of the wing tube.
    Oh BTW Jet, You were right about the rudder pin. Hinges full of epoxy and a MAJOR PIA to get the frickin pin in!!!!
    Now if I can figure out that smart buss extreme contraption and get all that crap installed, I'll be a happy camper!

    SG
     
    Luchnia and Jetpainter like this.
Loading...

Share This Page