HellBentPuppet
New to GSN!
Hey guys just curious if anyone else has experienced the following:
First off I run several Gecko ESCs and like em alot.
Has anyone else had these problems??? Timing auto, throttle start up 20% to 30% are the settings, throttle epa at 100% both ways. TX Aurora 9x. All bullets/connections are good to go. MOtors omega 130 and a turnigy4258-650 Cheap but fun
After a flight I taxi back to the pits and close throttle, then with no input the throttle blips and spools up for a split second. Does it both with an 85 and a 65
The next one is after a FT up line roll or hammer over and feed in throttle to start a downline no throttle response. Not every time, and some times I can slam throttle "closed" and rearm it but it has caused me to have to do some creative landings.
So anyone else know how am I screwing this up
I searched and didn't find anything so any wisdom or ideas would be great!
Thanks in advance!
First off I run several Gecko ESCs and like em alot.
Has anyone else had these problems??? Timing auto, throttle start up 20% to 30% are the settings, throttle epa at 100% both ways. TX Aurora 9x. All bullets/connections are good to go. MOtors omega 130 and a turnigy4258-650 Cheap but fun
After a flight I taxi back to the pits and close throttle, then with no input the throttle blips and spools up for a split second. Does it both with an 85 and a 65
The next one is after a FT up line roll or hammer over and feed in throttle to start a downline no throttle response. Not every time, and some times I can slam throttle "closed" and rearm it but it has caused me to have to do some creative landings.
So anyone else know how am I screwing this up
I searched and didn't find anything so any wisdom or ideas would be great!
Thanks in advance!
Last edited by a moderator: