Ohio AV8TOR
Just Do It
Jeff mine won't ship till Monday and I will be in Asia then for two weeks. Will you please check on the spinner size and report back? I was hoping EF would have the manual listed online but they do not.
Extreme Flight 76/83" MXS
- Thread starter Enterprise
- Start date
Jeff mine won't ship till Monday and I will be in Asia then for two weeks. Will you please check on the spinner size and report back? I was hoping EF would have the manual listed online but they do not.
hone
150cc
Oooh I hope mine ships today. Not in a hurry but im excited to see the plane. I won't be able to build mine until I get back from Washington for Huckfest and monsterfest. I'm going to pick up everything I need from Azhar while I'm up there to save on shipping. So it'll probably be 3 weeks before mine sees the air.
I'm looking forward to getting a new plane though. It's been a while since I've opened a box of fresh balsa
I'm looking forward to getting a new plane though. It's been a while since I've opened a box of fresh balsa
Last edited by a moderator:
Enterprise
150cc
Mine should get here tomorrow. I will probably get a few things started as I will have to check standoff length and see what I need to order to finish it. Not sure on servos. I wanted to do Hitec brushless 9475SHs, but they are not in stock anywhere yet. I have a few 7954s that are coming out of a plane I am selling and a BLS-172. I could rob them from other planes, just a matter of where. I have everything for the power system, 5335, 3 sets of bats, either the Gecko 150HV or the Hobbywing. I was debating whether to run a BEC pro, or do a powersafe with 2 seperate batteries. Either way I am reusing a Emcotec switch for the main packs. I was looking through the manual and I saw the same splines aft elevator servo setup that destroyed my first 78. I might have to get a few H9 turnbuckles again to get forward splines to work.
On the bling side I got a 3" and 4" EF spinner to see which one looks correct and work with the props. I was eyeing up the new Falcon electric spinners though.
On the bling side I got a 3" and 4" EF spinner to see which one looks correct and work with the props. I was eyeing up the new Falcon electric spinners though.
Ohio AV8TOR
Just Do It
Mine arrives Friday but I am still in Asia for another week. I am really glad I bought the Savox 1270's now with the 300 oz recommendation. I ordered a 3" carbon Ultimate spinner from Redwing
Enterprise
150cc
I am sticking to the 7954/7955 class servos for this plane. The 9475 is a little less torque on the specs, but with the new constant torque I am betting they will work.
I have the 2270s in my two 120cc planes so I know those 1270s will work very well.
I have the 2270s in my two 120cc planes so I know those 1270s will work very well.
Ohio AV8TOR
Just Do It
If you have them use them as they have a good track record but didn't I remember you doing some actual servo testing and the 7955's were way under spec? Maybe that was someone else.
Enterprise
150cc
They are in the low 300s consistently in testing by both me and ghoffman. I need to try a 7954, but I think they are the same servo with different gears (steel versus titanium)
Arkole Blake
50cc
Picked up a red ep version at BG yesterday. Plan on going with a 10s p160 setup (liberating the power system from a scale plane I no longer fly)
Hoping to build it this week and have it at House mountain FLI
Hoping to build it this week and have it at House mountain FLI
