Welcome To GiantScaleNews.com

GSN is the BEST in an RC online community. Less corporate BS and more down home fun. Better conversations with REAL RC'ers. Don't settle for the biggest when you can have the best!
  1. If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

For Sale 3DHS 106 Edge 540

Discussion in 'Airplanes, Gas/Glow' started by cam4569, Oct 2, 2016.

   
  1. cam4569

    cam4569 70cc twin V2

    Up for sale unfortunately is my new-ish 3DHS 106 Edge. The plane has flown only twice, due to some unexpected expenses I have to let this one go. I did not spare expense when I built this bird, the only part that was not new was the receiver. Savox servos all around, all the servo leads are soldered to reduce resistance in connections. I went a little overboard and hid all the wiring in the tunnel as well as wrapped it with red mesh to match the plane. On the lower cowl I added some vents to pull the air though and cool the engine. I will probably forget something on the list below, if you have any questions please ask. I will not ship and could meet part way for the correct deal. I have 100% ratings on ebay (same user name) and RC Groups.
    GP123 twin – I use redline oil
    JR Powersafe 12CH with 4 satellites – If you have a DX18 I will give you my program
    Spektrum Telemetry module with TEMP and RPM and voltage sensors
    2 Pulse 2S lipo 5000MHA
    Savox 1270 2 in each wing and one on each elevator
    Savox 2230 for the rudder
    SWB arms all around
    Falcon carbon fiber propeller with red carbon fiber spinner (I will also give you the factory one)
    All the factory bags that came with the plane (nice quilted wing and elevator bags) I have not installed the SFG or wing tips they will be included as well as any other parts I find for the plane at the time of the sale. I am sad to see this go, I really enjoyed building it and the couple flights were amazing.

    I am in Grand Coulee (roughly 1.5 hours north west of Spokane)
    $2200 OBO

    Also posted on GiantScaleNews, working on getting photos up here as well
     

    Attached Files:

    Last edited by a moderator: Oct 2, 2016
    stangflyer likes this.
  2. cam4569

    cam4569 70cc twin V2

    20160626_103117_001.jpg 20160626_073714.jpg 20160626_011322.jpg 20160524_102601.jpg 20160527_150241.jpg 20161001_192350.jpg 20161001_192253.jpg 20161001_192344.jpg
     
    Billybob and stangflyer like this.
  3. cam4569

    cam4569 70cc twin V2

    Plane has SOLD
     
Loading...

Share This Page