Park_Aviator
Member
From Bonedoc:
AJ Slick – Developed by Andrew Jesky
51” Wingspan
530 Square inches wing area
Weight 55-60 oz.
One-piece molded carbon fiber main landing gear
Aluminum HD wheel axles
HD wheels
Tiller-style tailwheel
Double-ball link/phenolic hardware package
New “AJ” color scheme done in Ultracote
Pre-drilled firewall w/ installed blind nuts
One-piece pre-molded canopy hatch with spring latch
Heavy-duty fully pre-assembled motor box
composite-reinforced landing gear plate
Intended for 150-170g outrunner motors (Hacker A30-XL, Torque 2812, GR 45, MotrolFly 2825)
13-15” props
3S 2500-3200mah
4S 2200-3200mah
Recommended motor combination includes:
Hacker A30 12XL on APC 14x7E and Airboss Elite 80, and 4S 2200 - 3000 Lipo
Other motors capable of powering the AJ Slick:
Hacker A30 10XL: 14x7 - 15x7 APC E on 3S 3000-4000 Lipo
APC 13x6.5E on 4S 2200-3000 20C Lipo
Torque 2814T/820: APC12x6E on 4S 2200 -3000 Lipo,
(APC 13x6.5) possible with good throttle management
(note Power 25 and Power 30 are too long to fit inside the Slick cowling)
Other possible ESC to use:
CC Phoenix 60 and 80 (with external BEC)
Hacker X70 Pro
Jeti Master Spin 66
Torque 2812/720 + AB Elite 60
Hacker A30 12XL + X70 Pro
GR 45 + Airboss 60
Notes from the Ben–
Andrew has designed a fantastic airplane for us. When we started this project, Andrew’s design goal was to produce an airplane with all the performance and features of a giant-scale plane in a medium-electric size. He wanted high-quality hardware, a strong design, very easy assembly – and this ARF delivers all that – along with stunning flight performance. No rock harrier, excellent snapping performance, powerful rudder…it’s all here in the AJ Slick. Watch for HD video of the Slick at SEFF on Fred Midgett’s Flightpass video site.
Slick Virtual Cockpit (Thanks to G.P!!!)
http://www.3dhobbyshop.com/assets/im...kpit_pilot.jpg
http://www.3dhobbyshop.com/assets/im...-corrected.jpg
http://www.3dhobbyshop.com/assets/im..._dashboard.jpg
http://www.3dhobbyshop.com/assets/im...ck_headest.jpg
AJ Slick – Developed by Andrew Jesky
51” Wingspan
530 Square inches wing area
Weight 55-60 oz.
One-piece molded carbon fiber main landing gear
Aluminum HD wheel axles
HD wheels
Tiller-style tailwheel
Double-ball link/phenolic hardware package
New “AJ” color scheme done in Ultracote
Pre-drilled firewall w/ installed blind nuts
One-piece pre-molded canopy hatch with spring latch
Heavy-duty fully pre-assembled motor box
composite-reinforced landing gear plate
Intended for 150-170g outrunner motors (Hacker A30-XL, Torque 2812, GR 45, MotrolFly 2825)
13-15” props
3S 2500-3200mah
4S 2200-3200mah
Recommended motor combination includes:
Hacker A30 12XL on APC 14x7E and Airboss Elite 80, and 4S 2200 - 3000 Lipo
Other motors capable of powering the AJ Slick:
Hacker A30 10XL: 14x7 - 15x7 APC E on 3S 3000-4000 Lipo
APC 13x6.5E on 4S 2200-3000 20C Lipo
Torque 2814T/820: APC12x6E on 4S 2200 -3000 Lipo,
(APC 13x6.5) possible with good throttle management
(note Power 25 and Power 30 are too long to fit inside the Slick cowling)
Other possible ESC to use:
CC Phoenix 60 and 80 (with external BEC)
Hacker X70 Pro
Jeti Master Spin 66
Torque 2812/720 + AB Elite 60
Hacker A30 12XL + X70 Pro
GR 45 + Airboss 60
Notes from the Ben–
Andrew has designed a fantastic airplane for us. When we started this project, Andrew’s design goal was to produce an airplane with all the performance and features of a giant-scale plane in a medium-electric size. He wanted high-quality hardware, a strong design, very easy assembly – and this ARF delivers all that – along with stunning flight performance. No rock harrier, excellent snapping performance, powerful rudder…it’s all here in the AJ Slick. Watch for HD video of the Slick at SEFF on Fred Midgett’s Flightpass video site.
Slick Virtual Cockpit (Thanks to G.P!!!)
http://www.3dhobbyshop.com/assets/im...kpit_pilot.jpg
http://www.3dhobbyshop.com/assets/im...-corrected.jpg
http://www.3dhobbyshop.com/assets/im..._dashboard.jpg
http://www.3dhobbyshop.com/assets/im...ck_headest.jpg