Search results
-
-
Aerobeez 90" Extra 330SC (50cc)
Maiden in about 2 hours! After a flight or two, I'll cut Brian Yak Dude loose for some fun on video.- gyro
- Post #80
- Forum: Aerobeez.com
-
-
The EXTRA 300 EXT Build Thread
Don't stress about covering them, I'm probably overthinking the aerodynamics... And you wouldn't want to loose the cool factor!- gyro
- Post #32
- Forum: Other Manufacturers
-
Discussion Choosing an air frame----frustrations!
In my personal opinion: without a doubt. While that doesn't mean you shouldn't buy the plane, it does mean that you should give the wings some careful attention. Eric mentions Joe above, so I'll add that Joe personally reinforced his wings... significantly. It's described in detail in the 72"...- gyro
- Post #84
- Forum: Giant / Scale RC General Discussions
-
The EXTRA 300 EXT Build Thread
Cool idea on the gear. Definitely made it lighter, and it really makes the gear go from ugly to attractive/ My only concern now would be the disruption in airflow over the openings causing some turbulent air to pass up towards the tail, and just create drag in general. Might be worthwhile to...- gyro
- Post #27
- Forum: Other Manufacturers
-
Discussion Choosing an air frame----frustrations!
I was all set to get the EF 78" until I saw the $120 shipping charge on it... More than 25% of the airframe cost to shipping is not for me, I'll wait until I can pick it up at a show.- gyro
- Post #79
- Forum: Giant / Scale RC General Discussions
-
The 3DRCForums -Discuss Anything Thread-
don't forget this year's comp is in Oregon :D- gyro
- Post #5,338
- Forum: Giant / Scale RC General Discussions
-
Bavarian Demon Cortex
I'll look at that... I specifically turned off the dual rates/expo when setting up per the manual, and my EPA are at mechanical max... At least I think. I'll double check.- gyro
- Post #37
- Forum: RC Radio Systems
-
Bavarian Demon Cortex
That's what I'd do normally, but normally it rolls axial. Maybe it's just me... I'm going to get Brian to fly it and see what he thinks- gyro
- Post #34
- Forum: RC Radio Systems
-
Bavarian Demon Cortex
Hmmmm... Not sure I want to lose the what it corrects on the ailerons... But I'll try it- gyro
- Post #31
- Forum: RC Radio Systems
-
-
The 3DRCForums -Discuss Anything Thread-
Check and make sure the elevators aren't warped- gyro
- Post #5,314
- Forum: Giant / Scale RC General Discussions
-
Bavarian Demon Cortex
I meant the opposite... Damn typing on my phone. LESS axial with the gyro on- gyro
- Post #27
- Forum: RC Radio Systems
-
Bavarian Demon Cortex
Seemed that for me, an aileron roll was less axial than with the gyro off...- gyro
- Post #25
- Forum: RC Radio Systems
-
3DHS 70" Velox
Also, to get max throttle resolution, make sure to adjust your EPA to 150 on both sides before the above procedure, so you get more "steps" in the throttle and can use the full resolution.- gyro
- Post #418
- Forum: ExtremeFlight/3DHS
-
Bavarian Demon Cortex
Big thanks to Dan for the timely advice to put the gyro on an adjustable channel, it really made finding the sweet spot easy! Flew 5 packs and had an absolute blast. Put me down as a covert! Winds were 5-7 gusts (frequently) to 15kts, and the cortex literally made me forget I was flying a 48"...- gyro
- Post #23
- Forum: RC Radio Systems
-
Bavarian Demon Cortex
I'll try that, thanks! Looks like a direct crosswind today, should be fun!- gyro
- Post #21
- Forum: RC Radio Systems
-
Aerobeez 30cc 71" Extra 330SC
Yes, a small amount of play is present, but it didn't appear to affect flight performance. Can you show your solution in a few pics?- gyro
- Post #90
- Forum: Aerobeez.com
-
Bavarian Demon Cortex
Well put Robert. This is exactly why I was excited about trying a Cortex, as I feel like with my skill level, I'm the perfect person to examine how the Cortex allows me to slow things down and improve some of my skills. I also setup the 3 position switch, so I'll be able to compare and...- gyro
- Post #19
- Forum: RC Radio Systems