• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    Great idea
  2. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    Have the foam core cut and the socket is installed. The first skin is in the bag, just might get is joined tomorrow, hopefully the second skin will get laid up tomorrow. The relief grooves for the corrugations are cut in the core
  3. TonyHallo

    The 'What did you do in your workshop tonight?' thread

    What program are you using?
  4. TonyHallo

    Help! Mystery plane

    My experience is that the needle valve is the first thing to go so plan to place it as well, It is part of the kit. The carb for the photo above is a Walbro WA 58 and takes a K10-WAT kit. You can find a kit most anywhere.
  5. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    After further review, I plan to cut the airfoil out of 1 pound expanded bead with a 1/2" 2 pound trailing edge. The weight was not sufficient to make the skins flat and the ribs are telegraphing through. This way I attach the skins under vacuum. Oh well, make another socket and set of skins...
  6. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    The stabilator skins are attached, need to work out details of the anti servo tab now. I'm sorry at this point that I didn't make the foam 2" thick on the trailing edge and even considering starting over or eliminating the anti servo tab on this build, time will tell. I need to study the tab...
  7. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    Just over 1 wrap of paper. I had good success with wax paper and Vaseline. Working slowly the around the tube working the wax paper into the Vaseline, I used 1 1/2 wraps of wax paper on the previous tubes. The parchment paper comes out of socket better than the wax paper. Full vacuum 28"...
  8. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    Cut the bottom airfoil and glued on skin on.
  9. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    Cut a little foam. Trimmed the leading and trialing straight and added a sheet to each, this provides a gluing area around the perimeter. Cut the top of the blanks straight and added a sheet to the top. Plan to use the top half to press the skins onto the ribs. Cut the upper airfoil and the...
  10. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    There must have been more moisture in the rudder foam than I expected. Put 2 drops of Gorilla glue in each hole that were rather oversized and the glue foam all the way out. As I was cutting the excess off and working the rudder back and forth the top hinge point broke. When the other three...
  11. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    I have the foam blanks in the stations and ready to start cutting. First cuts will be cutting the leading and trailing edges and adding foam to those areas. After the leading and trailing edges are added, the tube holes will be cut. Most of the foam at the centerline will be cut out. Out of...
  12. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    Glued the rudder onto the vertical fin, Once cured the lower bearing block will need shimmed and mounted to tail post. Started laying out the stabilator on one of the foam rib wing jig boards. I built the boards in the early 90's for my first foam rib construction, a 1/3 scale Wayne Urley...
  13. TonyHallo

    Help! Mystery plane

    I'm pretty sure the 42 came with the pointless ignition. Forgot to comment on the plane, never seen anything like it, back in the early 90's there was a foam plane called the Prime Cut that looks like your plane but was a little bigger.
  14. TonyHallo

    Help! Mystery plane

    The engine is a Quarda, I'm betting a 35. Does the coil have a wire on it that leads behind the fly wheel? Here is a photo of a Quarda 35 that I have, might just finish assembling it some day. Note it is the same. Looks like covering is attached to the foam, is this the case?
  15. TonyHallo

    Carbon Cub 55% SUPERLIGHT

    Is that 2 pound extruded foam you are using on the tail parts?
  16. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    The sleeve surrendered and came off the tube. Looks like it will work. Have the templates printed, need to get busy cutting them out.
  17. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    In the past I have used wax paper when I made wing tube sockets, decided to give parchment paper a try. The sockets will also be treated with peel ply and vacuum bagged, again these are deviations from previous work. The carbon fiber tube was treated with a coat of Vaseline then one wrap of...
  18. TonyHallo

    Yippee! What the postman brought

    Is that a high speed abrasive type or slow speed metal cutting type?
  19. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    Postman brought the new to me engine today. I'm happy! Also delivered the cf tube for the stabilator, 19 mm x 1mm. Not sure why I ordered a 3/4" x .3/32" and a 3/4" x .070" tube before but I did. This one is about 1/2 the weight. Tomorrow I can start making the tube sockets. Trying new...
  20. TonyHallo

    Yippee! What the postman brought

    Postman been busy, brought these new contour gauges, 6" and 10" long, both have locking feature. Used them for making the cabin rear former in the Cherokee. Much nicer than the old wire version, had a few bent wires and while trying to correct the situation it fell into many pieces, pitched it...
Top