• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    Had purchased a RB 25 redundancy bus for the Cherokee, it would everything that I wanted, triple receivers and dual voltage input. After doing a little research discovered that the fail safe is set in the redundancy buss and not in the receivers. Makes sense, however the buss is set with the...
  2. TonyHallo

    Yippee! What the postman brought

    Center drills arrived, sizes 00 through 5. When Snoopy ask a question about the drills, went back to the web site and just couldn't resist.
  3. TonyHallo

    The 'What did you do in your workshop tonight?' thread

    Great find Nick. had a similar problem with an IBEC, now I measure the voltage down strean of the IBEC with telemetry. Snoop, seen a video that said you should cut slow enough that the foam melts in front of the wire, going to try that some day. The 1 pound virgin that I just cut was great but...
  4. TonyHallo

    Discussion Kaos and UltraSport some info.

    Why do I think the UltraSport had a thicker wing? Every Kaos I seen fly seemed to be a full throttle the whole flight, may have just been to pilot. Had a King Kobra with a piped Rossi 60, rarely used the throttle. EDIT Went to Outer Limits, the wing thickness on both are very close, about 18%.
  5. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    I'm using US Composites 635 thin epoxy, it's about $100 for a gallon and hardener, you have three choices, fast hardener is a 4 to 1 mix and 4 hour cure, medium is 3 to 1 with 10 hour cure, and slow is 2 to 1 with 24+ hours cure. It was recommended by several people that are professionals in...
  6. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    After the auction this morning came home and blocked the wings with 220 and put the second layer of 3/4 ounce cloth on. Tried something different, spread the cloth out on the wing, painted there lines of epoxy 1" wide down the span, then used a credit card to squeegee out the excess. More work...
  7. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    Bought this seat from I Fly Tallies when I was building the Champ, decided it wasn't the right fit. Put it on the shelf. The seat looks like it belongs in a private jet. Found this photo of a 1966 Cherokee. Decided to see if I could make the seat work for the Cherokee. Sawed the bottom...
  8. TonyHallo

    Yippee! What the postman brought

    Must be in the air, bought a 5" four chuck yesterday, center drills the day before, and grooving tools on Tuesday.
  9. TonyHallo

    Yippee! What the postman brought

    Here are a few documents that will help you understand how it works.
  10. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    Taking a plane to auction on Saturday that had a little mishap during landing, hit an area on the runway that the skunks were working on, the left wheel hit the rolled up grass and flipped the plane over breaking the canopy. I'm not interested in repairing the plane because I'd rather work on...
  11. TonyHallo

    110" TIMBER Assembly Thread

    "But I've been in the wrong place But it must have been the right time"
  12. TonyHallo

    Yippee! What the postman brought

    Have you used Open/EdgeTx before Nick? Twelve or thirteen and still learning for me.
  13. TonyHallo

    Yippee! What the postman brought

    Drillsandcutters.com I get end mills and drill bits from them. Funny thing, I bought these from one of their emailings but can't seem to find then on their site.
  14. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    A little control linkage work, used 1/16" G10 for the horns.
  15. TonyHallo

    Yippee! What the postman brought

    Drills and Cutters.com had a sale on short stub drills. I stocked up on the tap and drill size bits for 4-40 through 8-32, some sizes were out of stock, some were low. Most were under $.50 each
  16. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    Yest that is it, zoomin on the second photo I sent and you can see that the fairing is not flat but humps up. The balsa under the windshield is not there on the full scale, only on the outside. Here's another view.
  17. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    The curved things under the windshield, look at the photo, see the fairing butt against the windshield, not under it. Zoom in on this photo.
  18. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    Thank you Snoopy. Bungeed the Cherokee carrier to a step ladder and then bungeed the fuselage onto the carrier to hold the fuselage vertical while the position of the engine was adjusted. Didn't source the spinner yet so a 3 1/2" plywood disc was use to align the engine. Once happy, the...
  19. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    Working on the servo pockets and hatches. The wing is rather thick so decided to mount the servos upright, or downright since they on the bottom of the wing. Pinned a fence to the wing made from scrap balsa. Using the router attachment cut .025" deep groove around the servo pocket, short...
  20. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    I suspect some of the problem is the fairing should be on the outside rather the the inside.
Top