• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. 3dNater

    The 3DRCForums -Discuss Anything Thread-

    cool little quad... Got two flights on the 70 slick today before lunch. That makes something like 12 for the week so far :D I know some of you guys do that in a day, but for me that is more flying than I normally get a chance to get in. In other news, I figured out my 51 slick motor bearings...
  2. 3dNater

    The 3DRCForums -Discuss Anything Thread-

    I'm picking the Heat... they are the better team IMO and since the pressure is the same for both teams it will come down to who can overcome the most. I was surprised when the Heat came back to win in OT... they were not having a good night and the Spurs were shooting amazingly well. Its not...
  3. 3dNater

    The 3DRCForums -Discuss Anything Thread-

    Great finals game tonight... bring on game 7 :D
  4. 3dNater

    New Here? Introduce yourself!

    Plow, you really shouldn't be lying to everyone... all of the twisted brothers know you are a good stick ;)
  5. 3dNater

    -= SLiCKNeSS SiCKNeSS =-

    I haven't had a chance to get any good video taken of my plane lately but you can enjoy the last one I did ;) http://www.youtube.com/watch?v=9rc7LUxtecI
  6. 3dNater

    -= SLiCKNeSS SiCKNeSS =-

    I had a blast with my 70" FB slick today! I put 4 flights on it and loved every minute. The DLE 35ra continues to perform well and has really turned into a monster after break-in.
  7. 3dNater

    -= SLiCKNeSS SiCKNeSS =-

    unless they are digital... they buzz all the time...
  8. 3dNater

    -= SLiCKNeSS SiCKNeSS =-

    buzzing = bad
  9. 3dNater

    3DHS --FLY LOW-- Always OFF TOPIC

    Cool, glad to hear ;)
  10. 3dNater

    3DHS --FLY LOW-- Always OFF TOPIC

    I recommend sticking to 18x8 or 19x8 for break-in. Mine hated a 20x8. Maybe you will have good luck with the 20x6 but early on, if your modded motor is anything like mine, it is going to have plenty of top-end and not too much torque. It improves A LOT as it breaks in though. At first it...
  11. 3dNater

    -= SLiCKNeSS SiCKNeSS =-

    I'm not expecting a recovery... of any kind ;)
  12. 3dNater

    The 3DRCForums -Discuss Anything Thread-

    Some people have been discussing this same issue with the hs65mg's in some other areas. Joe Smith responded about it often being a setup issue that causes premature failure. In the four foot plane size there really isn't anything (IMO) than the hs65's in terms of torque, centering, and speed...
  13. 3dNater

    3DHS --FLY LOW-- Always OFF TOPIC

    Ill fix it myself as long as the windings aren't toasted at all. I didn't notice the problem in flight so that has me hoping I caught it in time. I may put a 20x8 on again. I think the motor would like it ok now. Its hard to argue with how its flying with a 19x8 right now though. Its fairly...
  14. 3dNater

    3DHS --FLY LOW-- Always OFF TOPIC

    I just had a great morning at the club with my buddy Brigg. I took my 51 and 70 slicks. I got two flights on each. My hacker motor on the 51 is showing signs of bad bearings. It turns with too much resistance and squeaks... I'm happy I noticed it before putting it up for a third flight...
  15. 3dNater

    3DHS --FLY LOW-- Always OFF TOPIC

    Gets my vote. I have really been enjoying mine with no mods at all... might as well have some fun while you break it in.
  16. 3dNater

    3DHobbyShop 51" AJ Slick

    I have never had a profile that wasn't made of foam ;)
  17. 3dNater

    78'' Extra

    Even though DLE says a 2s lipo is ok on the ignition they recommend using less voltage. I am also running a single 2s LiFe pack and am having similar results to ryan_m. I am using different servos but the specs are similar and I'm having similar power usage/flight. You might get a tad...
  18. 3dNater

    78'' Extra

    I put the dle 35 in my 70 aj slick completely stock and it has been really nice. I'm sure the mods will make it even better but I do want to make sure ppl realize that my experience has shown this engine to be totally solide right out of the box. I literally bolted it on and tuned it and it...
  19. 3dNater

    -= SLiCKNeSS SiCKNeSS =-

    I'm starting to see the sickness part lol :D
  20. 3dNater

    Welcome AeroBeez!

    Any chance you will be coming out with a full fuse extra anytime soon?
Top