• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. gyro

    Gp-61

    I also use an idle up. The GP idles so smooth at 1500, it's tempting to leave it there, but I like it a 1800rpm in flight.
  2. gyro

    Gp-61

    Never heard of them having a problem after a few gallons, usually it's an initial issue right?
  3. gyro

    Aerobeez 30cc 71" Extra 330SC

    That's the exact setup in Brian's video. We used a 20x10 Xoar electric prop
  4. gyro

    Aerobeez 30cc 71" Extra 330SC

    Only with a small prop... You can have them made to any kv wind you want, there is a pull down menu when ordering. I think the 282 or 298kv is perfect for 8s depending on your prop preference.
  5. gyro

    Aj aircraft 93,73,56 laser

    Amazing photos Pete!
  6. gyro

    Gp-61

    Would also make sense for the starting problem, with not enough suction to draw fuel?
  7. gyro

    Aerobeez 30cc 71" Extra 330SC

    All Motrolfly motors run cooler than their competitors, it's something they're known for. Also, on 6s at max power, amps are between 115-125, so the 155A handles it easy. On 8s, the amps for the same power would be around 80-85A, so the ZTW 120HV is perfect, or an 80-100A ESC from another...
  8. gyro

    Help With Motor Timing and Poor Throttle Response (Gecko 120HV)

    AKf, it's a 19x10 you got from me :) Also, what is your current start strength at? Have you tried the highest setting? Tonight when I was setting up my reclaimed 74" edge, I set it at the 20% I had recommended to you, and I think that might be to low. I use 20% on the smaller planes but think...
  9. gyro

    Krill 35% extra 330sc

    you? lower pitch? damn.... looks great tho
  10. gyro

    Gp-61

    choke isn't choking :) might want to make sure your choke linkage is right, and that it's closing completely.
  11. gyro

    Gp-61

    sounds like that Vess might need a balance ring, and/or he might want to check his engine bolts for a loose one :)
  12. gyro

    Extreme Flight Owners Thread

    I was as well, until the 8a (16 burst) starting coming standard on the gecko rx (65a and up I think). That seems to be enough insurance for me :) I'm using just the gecko internal on 60" birds and down without a blink, and Brian is using just the gecko on his 71 Extra. For those who like...
  13. gyro

    Best Place to Buy Wooden Electric Props

    Just found an extra 19x10. I'll match rcdude's retail price, plus $3 to ship. Going to USPS in an hour anyway, so let me know AKfreak
  14. gyro

    Extreme Flight Owners Thread

    Damn
  15. gyro

    Best Place to Buy Wooden Electric Props

    For falcon electric, I think the best is www.justmodelprops.com :) That's the retail site for the US distributor for falcon
  16. gyro

    Help With Motor Timing and Poor Throttle Response (Gecko 120HV)

    Ok, first, congrats on a successful maiden! Sorry you really did break a prop! But now you have an opportunity to pick up a 20x10 and get closer to the 3000w you want. So I really don't want to go back and forth on the subject much more, however I'll agree with you and your friend Ben that the...
  17. gyro

    Best Place to Buy Wooden Electric Props

    Many of our site sponsors carry Xoar props, but some sizes area sometimes hard to find. For Xoar electric, I usually try a sponsor first, and if they don't have what I need, I go to www.rcdude.com. He's in pahrump, so shipping will be fast :)
  18. gyro

    Gp-61

    Way to go Kole :)
  19. gyro

    St George Utah 3D Bash

    The largest size we got on the initial order was 2x, however we can probably get you a 3x on a subsequent order.
  20. gyro

    Gp-61

    Tim, recommend you warm the engine up and then retorque the muffler bolts, they like to come loose.
Top