• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Xpress

    The 3DRCForums -Discuss Anything Thread-

    It's almost Friday!! Which means it's almost the weekend!
  2. Xpress

    Real Flight 7.5...

    I need to send my interface in for servicing. The input jack is all jacked.
  3. Xpress

    Post your best tricks and tips on how to get out to the field!

    Time to go fly!!!!!
  4. Xpress

    Aerobeez Extra 330SC At Joe Nall 2015

    Aerobeez, you should bring one up to the Lodi huck on October 2-4 this year!!!
  5. Xpress

    Post your best tricks and tips on how to get out to the field!

    Send the wife and kid on a mini-cation and go huck some!!
  6. Xpress

    3D Shop Construction

    Very nice! Green with envy! :D
  7. Xpress

    The I'm going out flying thread 2016

    Dude, sounds like you need 2 weeks straight of flying to catch up with everybody else! You should come down to Slow Cali before the El Nino hits and huck some with us ;)
  8. Xpress

    Motor won't arm after update to Jeti Mezon 90

    I tried helicopters once, worst 2 days of my hobby career!!!! I now stick to fixed wing. And I have a micro multirotor I play around with in the living room. :popcorn: Glad to hear Esprit was able to help out. I wonder if there is any updates for my Spin 99.....
  9. Xpress

    Joe Smith testing the Kontronik Proto Geared Motor System on 100cc Aeroworks Yak-55m!

    Prop RPM's can be optimized with a geared setup. It's more efficient in design at these sizes to use a geared setup than an outrunner. As someone else stated, it also takes loads off of the motor as well. So essentially, you don't need nearly as big of a motor. You can instead use a smaller...
  10. Xpress

    Batteries: Which Lithium Chemistry and How Are You Charging?

    Thunder Power Magna series would be my choice. Can charge up to 12c so you can be flying again in less than 10 minutes!! (for a 2700 pack that's 32 amps!!)
  11. Xpress

    A couple of questions on servos

    Hitec uses the following screws for our standard size metal geared servos: 5xxx/7xxx: 2.6x8mm 8xxx/9xxx: 3.0x8mm
  12. Xpress

    Post your full size avatar photos here

    Wish I still had this plane. Oh well, onto the next!
  13. Xpress

    The I'm going out flying thread 2016

    Only if an El Nino rolls through :eek::oblong:
  14. Xpress

    The I'm going out flying thread 2016

    Supposedly we are going to get hit with an El Nino real bad this winter here in slow cal. Tuna Crab have been washing up on the beaches for weeks now, which usually indicates that... Might be a nasty flying season ahead of us here...
  15. Xpress

    The I'm going out flying thread 2016

    Got some more Slick time in today. Man I love this little 70" airplane, total blast. :cool: Fixing to get into a 100CC soon here I hope.............. :epic:
  16. Xpress

    Aerobeez 64" 20% Scale Electric Conversion MXS-R At Joe Nall 2015

    We have tested the 7955's all the way up to direct 2s 8.4v and they work perfectly fine, same as any of our HV servos.
  17. Xpress

    Aerobeez 64" 20% Scale Electric Conversion MXS-R At Joe Nall 2015

    It's a great servo, it's just not super torquey. They make great throttle servos because of their speed, but even for a 25% airplane you want something mid 250-300oz of torque, especially with the size of control surfaces modern 3D airplanes have. Typically why I recommend at least the 7955 as...
  18. Xpress

    The I'm going out flying thread 2016

    Check this awesomeness out!!!!
  19. Xpress

    Aerobeez 70″ Slick PRO Step By Step Build Guide

    Call Esprit.
  20. Xpress

    Motor won't arm after update to Jeti Mezon 90

    Yes call Esprit, they know their stuff like the back of their hands and can figure this out. Bushwacker
Top