• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. gyro

    The 3DRCForums -Discuss Anything Thread-

    I sold my dx18 to move to the dx9. Been very happy with the 9
  2. gyro

    Aerobeez 48" EPP Extra 330 Build

    yes, that is very correct description, and the one most commonly used by others when describing these types of planes.
  3. gyro

    power system overheat problem on 48" extra 330 epp covered balsa model

    gotcha, makes sense. To me, just like cutting the outflow vents in the covering on a balsa model, I think it's up to the owner of the plane to do whatever is required to facilitate their specific power system, as some ESCs (larger ones, with a heatsink for example) don't need as much cooling...
  4. gyro

    3DHS 46'' AJ yak 55

    Congrats!
  5. gyro

    Extreme Flight Owners Thread

    Heard the same... It's cancelled.
  6. gyro

    power system overheat problem on 48" extra 330 epp covered balsa model

    48" extra 330 epp covered balsa problem Sounds to me like the issue is only with the motor/ESC/prop combo you installed, and not the plane at all. I don't think it's fair to call this an aircraft problem if the motor/ESC/prop combo you chose gets hot, especially when operating at/above the...
  7. gyro

    Aeroplus 60cc / 92" Edge 540 V3 from Limitless Aero

    Mike, I know for a fact you sleep less than I do! :p Yeah, it's been a busy, but very rewarding few years. I love assembling the planes almost as much as flying, so it makes this part of the hobby a lot of fun!
  8. gyro

    91" Extra 300-EXP ARF

    Great servos, really powerful and fast. We ran a set through the rx on full 2s LiPo power and they did fine. (Spektrum ar9110). Obviously, that rx is designed for a little more power, so hard to compare. The new redwing power boards are nice! http://youtu.be/CEbykrkavg0
  9. gyro

    Aeroplus 60cc / 92" Edge 540 V3 from Limitless Aero

    Following the instructions on the Aeroplus website, I started with the landing gear and assembled per the manual. Only thing different was it took 3 spacers on the outside and one inside to center correctly, but the kit includes 4 per side to we're good. I'm also interested to see how the...
  10. gyro

    Aeroplus 60cc / 92" Edge 540 V3 from Limitless Aero

    You should give some thought to it Jacob, it seems to be top-tier design and quality. For my hardware and components, I'm going with the following gear: GP-61 Engine from Limitless Aero Savox SC-1268SG Servos (.11 sec and 347.2 oz/in on 7.4v) @3drcparts.com servo extensions @WrongWayRc...
  11. gyro

    Bavarian Demon Cortex

    I need to update mine to reflect digital servo if that isn't the default. :(
  12. gyro

    Aeroplus 60cc / 92" Edge 540 V3 from Limitless Aero

    Ok, first thanks to Kole and Limitless Aero for bringing these awesome planes into the US for us all to enjoy. I bought mine from Kole, and met him in Houston on his way to Joe Nall to pick it up! Once home, I couldn't wait to unbox and check it out. First, the coffin-like container protected...
  13. gyro

    35CC 3D Plane

    I've never had to wait more than 2 days for them to return a phone call. And as a bonus, they're also on this forum! Fromeco, can do drop by to answer a question? on my switches, the wires for the deans input are a larger guage than the jr plug output wires. also, I believe the connector...
  14. gyro

    Aerobeez 74" slick 540 mods

    nate, the elevator mod looks great, nice job! looks like it flew well with the change also?
  15. gyro

    The 3DRCForums -Discuss Anything Thread-

    I got nothing then... :(
  16. gyro

    Bavarian Demon Cortex

    It's good to have it on the knob for adjustment in flight to find the perfect spot. Then, put it on a switch with 0 on one side, and whatever you want for the normal mode. Basically, your travel adjust sets the gain.
  17. gyro

    Bavarian Demon Cortex

    I don't think you "have to" if you set it up on a switch and disable or don't engage the heading hold side. All you need to do is put the travel adjust for the heading hold side to zero, and it won't engage. Right YellowJacketsRC or 3drcparts.com?
  18. gyro

    Bavarian Demon Cortex

    I found 25-30 works really well for me, so it might be a good start point for you also :)
  19. gyro

    The 3DRCForums -Discuss Anything Thread-

    What size / amp rating internal BEC? I ask because I had some issues myself in the past, and traced them back to brownouts caused by insufficient BEC power supplied to the rx
  20. gyro

    The 3DRCForums -Discuss Anything Thread-

    What is powering your rx? (BEC, etc.)
Top