• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Xpress

    New Aerobeez 48" Mini Banshee!!

    I've found a couple more motors in my supply, each are 35mm and 1400kv so at least I have a few motors to play with :)
  2. Xpress

    New Aerobeez 48" Mini Banshee!!

    Aerobeez has came out with an awesome assortment of newly revamped versions of their EPP Hybrid foamies so when I heard about it, I knew I had to have one. Lo and behold, they had a mini version of their popular 91" Slick 540 'Banshee' (which so happens to be my favorite airplane in my hangar)...
  3. Xpress

    Rebuilding the Yak...again.

    I'll probably have everything bolted in place and ready to go before I even get a chance to take the camera out :eek::oblong::laughing: I would have just tried to repair the cowl and rudder but they have both already been repaired a number of times before and it was just time for some new parts...
  4. Xpress

    Rebuilding the Yak...again.

    Hey me and you get to work on our Yaks at the same time :way_to_go: Tony should be shipping my 107 Yak parts out hopefully within the next day or two.
  5. Xpress

    Aerobeez 106" extra 330 build thread

    Pin hinges inside of the hinge pockets so it should be super strong!! Looking forward to your build Brandon!
  6. Xpress

    Need some advice on a new 30cc 3D plane.

    The perfectly straight LE on an Edge wing is an extremely stable design in high alpha. Every edge I've flown just sits there in a harrier so it's the ideal airframe for a beginner. Not sure why you say they're snappy, quite the opposite from my experiences :confused:
  7. Xpress

    Aerobeez 45% Extra 300 assembly

    I know :) Speaking of heat guns, did more work on the covering today. She's all nice and tightened up. The turtle deck was the worst, lots of gas bubbles that had to be massaged out with the iron. I am going to polish up the covering using some motorcycle spray cleaner/polish, should...
  8. Xpress

    Aerobeez 45% Extra 300 assembly

    Well, I had a gnarly headache most of the day yesterday. As soon as it started to clear, I was out of bed and went to work on the Extra. First thing I needed to do was fill the hole where the DA200 mufflers poked through, then glue a new sheet of 1/8" ply over the front to help reinforce what is...
  9. Xpress

    The 'What did you do in your workshop tonight?' thread

    After being in bed all day because I had a raging headache, I finally had enough and went and worked on the Extra in the afternoon. Got a new firewall in and worked on the covering.
  10. Xpress

    Assembly: EF 110" Yak-54 V2

    Definitely could be an issue if the spacing is too close. You would figure this would be taken into account, but maybe it works fine with stock ball links? Knowing you, you probably have a set of DuBro's already lined up, ready to go in.. :sneaky:
  11. Xpress

    Give-a-way contest! Win a Hanger 9 Extra 300X

    Can we make as many posts as we want? Or just 1 post? Either way, I'm in!
  12. Xpress

    New from Twisted Hobbies

    Cody let me wiggle the sticks on the prototype at Nall and holy cow!!! That thing is just a straight up riot!! Should have seen all of us when he told us he was gonna call it the Crack Fokker :laughing:
  13. Xpress

    The 'What did you do in your workshop tonight?' thread

    Ordered up new parts for my 107" Yak today too :D I tried to go through Chief but they didn't have them in stock (not their fault, this is a special color scheme) and would have had to special order them for me. Normally I wouldn't have a problem but I was given an ultimatum: cough up an extra...
  14. Xpress

    The 'What did you do in your workshop tonight?' thread

    Cut a hole for the ZDZ carb in the 45% tonight. Engine bolted right in after that. Discovered quickly that I will need to get longer bolts because I need to space the engine out 1 more RCH to clear the cowl comfortably, plus I will need to fit some washers behind the firewall. Thinking I...
  15. Xpress

    The I'm going out flying thread 2016

    x2 :eek::(
  16. Xpress

    The I'm going out flying thread 2016

    Had a blast yesterday with @Joe Hunt and the crew throwing down at the OCMA club. Joe gets the low pass of the day award!! Left a nice skidmark in the runway :cool:
  17. Xpress

    Assembly: EF 110" Yak-54 V2

    Oh man, pressure's on!! I was planning on showing up around then. I figure if I leave here around 6:30-7 I should get there around then.
  18. Xpress

    Assembly: EF 110" Yak-54 V2

    So are we flying tomorrow or what?? :oblong::D
  19. Xpress

    Aerobeez 45% Extra 300 assembly

    I am going with a TDRC 50oz tank as per @Terryscustom recommendation. http://www.taildraggerrc.com/new-tdrc-version-2-50-ounce-rtf-clear-fuel-tank/ It's never the big purchases like an engine, it's always the small little things like fuel tanks, batteries, switches, etc. that always wind up...
  20. Xpress

    Aerobeez 45% Extra 300 assembly

    I might be accosted for that one... :oblong: Speaking of Servos, went with HS-5565MH's. Coreless, digital, HV, all I will need for throttle and choke. HS-7980TH's will come later.
Top