• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. thurmma

    The 'What did you do in your workshop tonight?' thread

    Added some vinyl bling from B&E Graphics to the Red LX tonight. I designed the ZDZ180 logo and sent Eric a high resolution picture of the 180 for the tear out vinyl. I have never applied vinyl before and was a little worried about getting air bubbles. These went on so easy that I didn't even...
  2. thurmma

    The 'What did you do in your workshop tonight?' thread

    Bill Hempel has 5" CF spinners with lightened back plates AND already slotted for either 2 or 3 blade props. 2 blade is $65.00 and 3 blade is $70.00. I have one on one of my LX's and it works and looks great. http://www.billhempel.com/accesories/index.php scroll all the way to the bottom of the...
  3. thurmma

    The 'What did you do in your workshop tonight?' thread

    Thank you Rob! I didn't do anything on the back side because of the negative pressure lips on the bottom. I feel that everything should be evacuated quite nicely.
  4. thurmma

    The 'What did you do in your workshop tonight?' thread

    Finally got the baffling done on the LX and buckled up the front end :-) With any luck I will maiden it tomorrow afternoon.
  5. thurmma

    The 'What did you do in your workshop tonight?' thread

    You will like the way that little one flies! I had one and wish many times I had it back :)
  6. thurmma

    The 'What did you do in your workshop tonight?' thread

    @Krzy4RC was running these motors in his IMAC plane last season. He may be able to offer some insight for you.
  7. thurmma

    The 'What did you do in your workshop tonight?' thread

    I believe I have become a firm believer in Hacker motors :) I replaced the Exceed RC Monster power 25 870kv in the Mini-Banshee with a Hacker A30-14L V3 and went from 8950 rpm to 10,350! Same prop and freshly charged 4s 45C battery. I also put a Hacker on my daughter's 330LT but, haven't tested...
  8. thurmma

    The 'What did you do in your workshop tonight?' thread

    Yes I am! I love the sound of these cans. I have heard that the Proflow cans choke the 180 down to much on the high end which would be a bad thing. Hope to find out this weekend but, the forecast is not looking good at this point. If it decides to clear up enough for a test flight, I will let...
  9. thurmma

    The 'What did you do in your workshop tonight?' thread

    Finally got the Red 330LX fired up tonight. ZDZ180 on Proflow cans swinging a 29x12EVO 3 blade as a break-in prop :) Have to love the ZDZ engines :) Another short video after a small tweak on the carb.
  10. thurmma

    News Purple Plug Puller works

    I don't usually pick up items like this because I figure the way I am doing it works. Let me tell you that this is one product anyone who owns a gas engine needs! I have probably had mine about a month and was looking at it thinking ok, that will never get used, should have bought something...
  11. thurmma

    new to GSN

    Welcome to GSN! Nice to see another IMAC friend among the crowd. You will not find a more friendly forum on the face of the planet than GSN!
  12. thurmma

    Take this survey and you could WIN!

    I had to write it in also :)
  13. thurmma

    The I'm going out flying thread 2016

    She already has a newer truck than me :)
  14. thurmma

    The 'What did you do in your workshop tonight?' thread

    They are MPX connectors for the wings. I use them so there is only one plug for each wing. Makes it much easier to assemble/disassemble the plane. Also, keeps you from plugging a servo into the wrong channel :) I have been doing this for the last few large planes that I have built. The...
  15. thurmma

    The 'What did you do in your workshop tonight?' thread

    Finished installing the cb200, dual rx's and remoteswitch in the Red 330 LX tonight. Trying to keep it as clean as possible yet still accessible in case access is needed.
  16. thurmma

    The 'What did you do in your workshop tonight?' thread

    Nice job!! You would never know they were almost completely destroyed :)
  17. thurmma

    The I'm going out flying thread 2016

    Went out and flew my daughters 61" 3DHS Extra 330LT today. What a blast! That plane flies like a much larger plane than it is. Very little coupling in knife edge flight compared to the 40% 330LX that I fly. Very predictable and just a fun plane to fly. Now I want one
  18. thurmma

    Howdy from Wisconsin!

    Welcome to GSN! A great place with even better people and none of the drama :) Happy New Year!
  19. thurmma

    The 'What did you do in your workshop tonight?' thread

    Finished soldering connectors on the batterries for the LX and also finished the wing harnesses. Now to figure out where to mount the electronics and try to get this plane fired up, finally.
  20. thurmma

    IMAC Carden Pro 124 Build, My Dream Plane

    Cam, Sorry to hijack your thread again but, I thought I would post a picture of the grommets and how evenly they are squished under the cf servo spacers when they are used as a securing mechanism :-)
Top