• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Stevendavis

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    Very nice work!
  2. Stevendavis

    Mini lathe (and mill) discussion.

    What in the world does that go into?? Looks much bigger than a locomotive crank! I might could if I go with 24v instead of 12. 😄
  3. Stevendavis

    Mini lathe (and mill) discussion.

    Still need to make the tailstock lock. Working on some type of display setup.
  4. Stevendavis

    Mini lathe (and mill) discussion.

    Got the tailstock spindle done!
  5. Stevendavis

    Mini lathe (and mill) discussion.

    Thanks Tony!
  6. Stevendavis

    Mini lathe (and mill) discussion.

    I'm going to try and keep them coated. Maybe I should look for something better??. I spent the day today working on the tiny lathe. Got work done on the tailstock. Still a lot to do to finish up the tailstock.
  7. Stevendavis

    Mini lathe (and mill) discussion.

    Just planning on water for now.
  8. Stevendavis

    Mini lathe (and mill) discussion.

    A little addition!
  9. Stevendavis

    Mini lathe (and mill) discussion.

    We've got cooling water lines going to our journal bearings. The cooling water is hard piped into the tailrace of the powerhouse, but also travel through the sump pit that collects the shaft seal water. This RTD will drop into a pipe in the sump pit and monitor sump water temperature.
  10. Stevendavis

    Mini lathe (and mill) discussion.

    It's a sump pit cooling water probe. With the new regs, we have to install cooling water temp probes on the incoming, outgoing and sump pit.
  11. Stevendavis

    Mini lathe (and mill) discussion.

    With the RTD
  12. Stevendavis

    Mini lathe (and mill) discussion.

    Built an rtd sleeve for work yesterday.
  13. Stevendavis

    Mini lathe (and mill) discussion.

    Had a little time this week so I was able to get the tailstock DRO installed.
  14. Stevendavis

    Scale BUSA Super Cub

    Glad your getting some use out of the tap guide!! Plane is looking great so far! I really need to get back on mine.
  15. Stevendavis

    For Sale Extreme Flight Yak 54 For Sale

    It's sold!
  16. Stevendavis

    The 'What did you do in your workshop tonight?' thread

    Got the nav lights in and covers on!
  17. Stevendavis

    The 'What did you do in your workshop tonight?' thread

    New project on the table.
  18. Stevendavis

    Mini lathe (and mill) discussion.

    Made some sleeves for my boring bars. Still need to make a couple more. so far so good. For the larger bar, I had to run set screws down through the top of the holder. Took me a the better part of an hour just to tap those out due to the hardness of the metal.
  19. Stevendavis

    Mini lathe (and mill) discussion.

    The saw has been working great as well.
  20. Stevendavis

    Mini lathe (and mill) discussion.

    Hey Tony, It's a spider for the lathe spindle. I have to make a bunch of sheer pins for work and the stock is 3' long. This will let me use the 3' stock without having to cut it down to work with.
Top