• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. A

    Aerobeez 30cc 71" Extra 330SC

    Hey brian, i also am using a 19x8 xoar prop
  2. A

    Aerobeez 30cc 71" Extra 330SC

    Hey Brian, thanks man! The red and black scheme looks great. My setup is starts with the dle35 ra than moves back to two regulators under the belly of the fuse. One connects to ignition and the other to receiver/servo. I run two separate 2400 lipo packs that sit on both sides of the fortitude...
  3. A

    Aerobeez 30cc 71" Extra 330SC

    These are my new custom graphics for the plane i had made Hope you like
  4. A

    Aerobeez 30cc 71" Extra 330SC

    alright!!!! throttle curve established and dialed in! rolling harrier and hover done with ease!!!!! 19x10 prop perfect!! motor loves it. What a great plane!!! she floats like a feather with the dle 35ra, Thank you for all your advice guys
  5. A

    Aerobeez 30cc 71" Extra 330SC

    What a great flight electric, system seems to work really well I am tempted to get rid of the 35 RA lol
  6. A

    Aerobeez 30cc 71" Extra 330SC

    cant wait!!
  7. A

    Aerobeez 30cc 71" Extra 330SC

    see page 10
  8. A

    Aerobeez 30cc 71" Extra 330SC

    Finished product
  9. A

    Aerobeez 30cc 71" Extra 330SC

    I used very thin plywood, you can see the dark line that runs flush with the fuse and elevator, thats the hardwood, there is no play, i also cut the carbon tube 1/8th of an inch
  10. A

    Aerobeez 30cc 71" Extra 330SC

    So I noticed a lot of play in the elevator stab I had to Cap the gap with thin plywood and cut it so there is no play or wobble .did you have this issue?
  11. A

    Aerobeez 30cc 71" Extra 330SC

    Flew the 330sc , really happy with it , no cg issues
  12. A

    Check out the DLE-35RA

    alrighty, thanks guys.
  13. A

    Check out the DLE-35RA

    alrighty, thank you very much, thats a huge help, i do fly 3d, would a 18x8 be to small? would this be a good specifically high alpha maneuvers
  14. A

    Check out the DLE-35RA

    im using a dx8 with ar9. channel spectrum receiver. I am flying a balanced 20x8 xoar, i also have a 19x8 prop ive balanced by xoar as well, but have not tried this. I have ran about 30 oz of fuel through it on lawn boy and 93 octane gas, could you give me a rough estimate on your throttle...
  15. A

    Check out the DLE-35RA

    Hey guys, i have a question, my dle 35ra throttle response seems sluggish when plane is flying, especially when i idle down, one other thing, i feel like my servo arm may be to long for the throttle. When i throttle up to around quarter throttle, its pretty much at full wide open, i really don't...
  16. A

    DLE 35 RA Mods- Reed Valve, Bowman Ring, Single Post prop adapter

    Hey guys, i have a question, my dle 35ra throttle response seems sluggish when plane is flying, especially when i idle down, one other thing, i feel like my servo arm may be to long for the throttle. When i throttle up to around quarter throttle, its pretty much at full wide open, i really don't...
  17. A

    New Here? Introduce yourself!

    My name is aaron, i have been flying for 4 years now. I am a self taught pilot. My first was the switch from tower hobbies. I flew that plane and trained for nearly a year and half. I began with pattern and moved onto precision aerobatics after i bought a more aggressive electric plane. I then...
  18. A

    Check out the DLE-35RA

    okay, is it 30:1 or do you deviate from this
  19. A

    Check out the DLE-35RA

    What 2 cycle oil should i use for my dle35 ra if lawn boy generation 2 oil is not available, this is for break in period, and after break in what can i use? Should I mix 30:1 also or 32:1
  20. A

    New Here? Introduce yourself!

    Hey Mike I am a pilot instructor for the CMAC in Kent Ohio, I fly 3-D I fly precision aerobatic planes Aerobee's planes and Just plain and simple low to the deck
Top